The following terms are used in subsequent sections; it may be helpful to refer to these definitions.
-fasl
+ fasl
files are the object files produced
by The Lisp
+ The Lisp
kernel is a C program with a fair amount of
platform-specific assembly language code. Its basic job is to
@@ -1772,5 +1772,5 @@
files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A heap
+ A heap
image is a file that can be quickly mapped into a
process's address space. Conceptually, it's not too different
@@ -1783,5 +1783,5 @@
standard full heap image files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A bootstrapping image is a minimal
+ A bootstrapping image is a minimal
heap image used in the process of building Clozure CL itself. The
bootstrapping image contains just enough code to load the rest
@@ -1795,5 +1795,5 @@
as-yet-unsupported ones) has a uniquely named subdirectory of
-
+
TRACE {
-
+
CCL:*TRACE-LEVEL* [Variable]
Variable bound to the current nesting level during execution of before and after trace actions. The default printing actions use it to determine the amount of indentation.
-
+
CCL:*TRACE-MAX-INDENT* [Variable]
The default before and after print actions will not indent by more than the value of ccl:*trace-max-indent* regardless of the current trace level.
-
+
CCL:TRACE-FUNCTION
-
+
CCL:*TRACE-BAR-FREQUENCY* [Variable]
@@ -3226,5 +3226,5 @@
@@ -3265,5 +3265,5 @@
@@ -3437,5 +3437,5 @@
The value of this variable is used when :EXTERNAL-FORMAT is
@@ -3463,5 +3463,5 @@
The value of this variable is used when an external-format
@@ -3495,5 +3495,5 @@
domain---This is used to indicate where the external
@@ -3529,5 +3529,5 @@
Despite the function's name, it doesn't necessarily create a
@@ -3702,5 +3702,5 @@
@@ -4264,5 +4264,5 @@
@@ -4313,5 +4313,5 @@
@@ -4366,5 +4366,5 @@
Clozure CL sets up logical pathname translations for logical hosts: The
-
+
CCL:MAP-FILE-TO-IVECTOR
-
+
CCL:UNMAP-IVECTOR
-
+
CCL:MAP-FILE-TO-OCTET-VECTOR
-
+
CCL:UNMAP-OCTET-VECTOR
Clozure CL provides the
function As of Clozure CL 1.2, the constant
-
+
SAVE-APPLICATION
@@ -5061,5 +5061,5 @@
@@ -5108,5 +5108,5 @@
@@ -5166,5 +5166,5 @@
@@ -5340,5 +5340,5 @@
@@ -5374,5 +5374,5 @@
@@ -5460,5 +5460,5 @@
output-file---
@@ -5719,5 +5719,5 @@
statistics---
- If non-nil (the default), a comma-separated file is also
+ If non-nil (the default), a comma-separated file is
generated with the summary of statistics. You can specify a
filename for the statistics argument, otherwise
@@ -5728,5 +5728,5 @@
@@ -5762,5 +5762,5 @@
@@ -5784,5 +5784,5 @@
@@ -5810,5 +5810,5 @@
@@ -5836,5 +5836,5 @@
@@ -5867,5 +5867,5 @@
@@ -5894,5 +5894,5 @@
@@ -5917,5 +5917,5 @@
@@ -5941,5 +5941,5 @@
@@ -5968,5 +5968,5 @@
@@ -5995,5 +5995,5 @@
@@ -6162,5 +6162,5 @@
@@ -6263,5 +6263,5 @@
@@ -6298,5 +6298,5 @@
@@ -6329,5 +6329,5 @@
@@ -6559,5 +6559,5 @@
-
+
BUILD-APPLICATION &key
( process-suspend was previously called
@@ -7886,5 +7886,5 @@
@@ -7939,5 +7939,5 @@
It would be nice to have more discussion of what it means
@@ -8083,5 +8083,5 @@
It would probably be better for result
@@ -8222,10 +8222,10 @@
This should arguably be SETFable, but doesn't seem to
@@ -8514,5 +8514,5 @@
Advises the OS scheduler that the current thread has nothing
@@ -8523,10 +8523,10 @@
This is a holdover from the days of cooperative
@@ -8551,5 +8551,5 @@
Executes body
@@ -8732,5 +8732,5 @@
Creates and returns an object of type CCL::READ-WRITE-LOCK.
@@ -8938,10 +8938,10 @@
There probably should be some way to
@@ -8966,5 +8966,5 @@
result should probably be interpreted
@@ -9129,5 +9129,5 @@
result should probably be interpreted
@@ -9173,5 +9173,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -9223,5 +9223,5 @@
@@ -9269,5 +9269,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -9277,5 +9277,5 @@
@@ -9320,5 +9320,5 @@
process---a process, typically created by process-run-function or by make-process Waits for the specified process to terminate. If the
@@ -9587,5 +9587,5 @@
address-family---The address/protocol family of this socket. Currently
@@ -9687,5 +9687,5 @@
Creates and returns a new socket Extracts the first connection on the queue of pending
@@ -9740,5 +9740,5 @@
Converts a dotted-string representation of a host address to
@@ -9768,5 +9768,5 @@
ipaddr---A 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into octets. ipaddr---a 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into a host name
@@ -9823,5 +9823,5 @@
host---Specifies the host. It can be either a host name
@@ -9831,5 +9831,5 @@
Converts a host spec in any of the acceptable formats into a
@@ -9851,5 +9851,5 @@
port---Specifies the port. It can be either a string, such as
@@ -9860,5 +9860,5 @@
Finds the port number for the specified port and protocol Reads a UDP packet from a socket. If no packets are
@@ -9934,5 +9934,5 @@
Send a UDP packet over a socket. socket---The socket to shut down (typically a tcp-stream) Shuts down part of a bidirectional connection. This is
@@ -9996,10 +9996,10 @@
Returns the native OS's representation of the socket, or
@@ -10026,10 +10026,10 @@
Returns the 32-bit unsigned IP address of the remote host,
@@ -10051,10 +10051,10 @@
Returns the remote port number, or NIL if the socket is not
@@ -10076,10 +10076,10 @@
Returns 32-bit unsigned IP address of the local host. Returns the local port number Returns :internet or :file, as appropriate. Returns :active for tcp-stream, :passive for
@@ -10173,10 +10173,10 @@
Returns the socket format as specified by the :format
@@ -10198,10 +10198,10 @@
returns :stream for tcp-stream and listener-socket, and
@@ -10222,10 +10222,10 @@
simple-error The OS error code of the error A symbol representing the error code in a more
@@ -10299,10 +10299,10 @@
A string describing the context where the error happened. On
@@ -10325,5 +10325,5 @@
The close generic function can be applied to sockets. It
@@ -10357,5 +10357,5 @@
executes body with var bound to the result of applying
@@ -10496,5 +10496,5 @@
program---A string or pathname which denotes an executable file.
@@ -10547,5 +10547,5 @@
Runs the specified program in an external (Unix) process,
@@ -10567,5 +10567,5 @@
proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM. Sends the specified "signal" to the specified
@@ -10596,10 +10596,10 @@
Returns the process id assigned to
@@ -10623,10 +10623,10 @@
Returns the stream created when the input argument to
@@ -10649,10 +10649,10 @@
Returns the stream created when the output argument to
@@ -10676,10 +10676,10 @@
Returns the stream created when the error argument to
@@ -10703,10 +10703,10 @@
Returns, as multiple values, a keyword denoting the status
@@ -10738,5 +10738,5 @@
A stream that is associated with a file descriptor has
attributes and accessors:
@@ -11027,5 +11027,5 @@
stream---a stream, presumably a fundamental-input-stream. Should try to read up to count elements from stream into the
@@ -11578,5 +11578,5 @@
stream---a stream, presumably a fundamental-output-stream. should try to write the first count elements of list to
@@ -11609,5 +11609,5 @@
stream---a stream, presumably a fundamental-input-stream should try to read successive elements from stream into
@@ -11648,5 +11648,5 @@
stream---a stream, presumably a fundamental-output-stream should try to write successive elements of vector to stream,
@@ -11686,5 +11686,5 @@
Returns the file descriptor associated with
@@ -11727,5 +11727,5 @@
stream---An input stream. The method defined on
@@ -11759,5 +11759,5 @@
Writes max-octets octets to stream from ivector, starting at
@@ -11765,5 +11765,5 @@
CHUD:*SHARK-CONFIG-FILE*
[Variable] CHUD:METER form &key (reset nil)
+ CHUD:METER form &key (reset nil)
(debug-output nil) [Macro] Executes FORM (an arbitrary lisp form) and returns whatever
@@ -14053,5 +14053,5 @@
Reads a symbol from the current input stream, with *PACKAGE*
@@ -16146,5 +16146,5 @@
In compile-file. fasl files store the
@@ -1762,5 +1762,5 @@
see
Table 3.1, âPlatform-specific filename conventionsâ ccl/lisp-kernel/; each such
-
+
contains a Makefile and may contain some auxiliary files (linker
scripts, etc.) that are used to build the lisp kernel on a
@@ -2619,5 +2619,5 @@
keyword
global-value}* {spec |
@@ -3063,15 +3063,15 @@
spec &key {keyword value}* [Function]
ccl and homeCCL logical host should point to the
ccl directory. It is used for a variety of
@@ -4520,5 +4520,5 @@
platforms.pathname
@@ -4580,5 +4580,5 @@
a memory error.displaced-array
@@ -4592,5 +4592,5 @@
target is an empty vector (of length zero).pathname
@@ -4602,5 +4602,5 @@
bytes.displaced-array
@@ -4641,5 +4641,5 @@
static.CCL:SAVE-APPLICATION, which creates a file
@@ -4775,5 +4775,5 @@
converted, because address 0 can always be relied upon to refer to
the same thing.CCL:+NULL-PTR+
refers to a MACPTR object that points to address 0.ccl64 script.
filename
@@ -4987,5 +4987,5 @@
name "MyApplication")
@@ -6991,5 +6991,5 @@
@@ -12566,5 +12566,5 @@
CCL 1.2 and later, the #& reader macro can be used to
@@ -16205,5 +16205,5 @@