The following terms are used in subsequent sections; it may be helpful to refer to these definitions.
-fasl
+ fasl
files are the object files produced
by The Lisp
+ The Lisp
kernel is a C program with a fair amount of
platform-specific assembly language code. Its basic job is to
@@ -1766,5 +1766,5 @@
files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A heap
+ A heap
image is a file that can be quickly mapped into a
process's address space. Conceptually, it's not too different
@@ -1777,5 +1777,5 @@
standard full heap image files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A bootstrapping image is a minimal
+ A bootstrapping image is a minimal
heap image used in the process of building Clozure CL itself. The
bootstrapping image contains just enough code to load the rest
@@ -1789,5 +1789,5 @@
as-yet-unsupported ones) has a uniquely named subdirectory of
-
+
TRACE {
-
+
CCL:*TRACE-LEVEL* [Variable]
Variable bound to the current nesting level during execution of before and after trace actions. The default printing actions use it to determine the amount of indentation.
-
+
CCL:*TRACE-MAX-INDENT* [Variable]
The default before and after print actions will not indent by more than the value of ccl:*trace-max-indent* regardless of the current trace level.
-
+
CCL:TRACE-FUNCTION
-
+
CCL:*TRACE-BAR-FREQUENCY* [Variable]
@@ -3215,5 +3215,5 @@
@@ -3254,5 +3254,5 @@
@@ -3426,5 +3426,5 @@
The value of this variable is used when :EXTERNAL-FORMAT is
@@ -3452,5 +3452,5 @@
The value of this variable is used when an external-format
@@ -3484,5 +3484,5 @@
domain---This is used to indicate where the external
@@ -3518,5 +3518,5 @@
Despite the function's name, it doesn't necessarily create a
@@ -3691,5 +3691,5 @@
@@ -4253,5 +4253,5 @@
@@ -4302,5 +4302,5 @@
@@ -4355,5 +4355,5 @@
Clozure CL sets up logical pathname translations for logical hosts: The
-
+
CCL:MAP-FILE-TO-IVECTOR
-
+
CCL:UNMAP-IVECTOR
-
+
CCL:MAP-FILE-TO-OCTET-VECTOR
-
+
CCL:UNMAP-OCTET-VECTOR
Clozure CL provides the
function As of Clozure CL 1.2, the constant
-
+
SAVE-APPLICATION
+ When true, calls (in effect)
+ If true, calls (in effect)
+
+ A number specifying the mode (permission bits) of the output file.
+ Specifies the file to prepend to the saved heap
+ image. A value of
+ If the prepended file is execuatable, its execute
+ mode bits will be copied to the output file.
+
+ This argument can be used to prepend any kind of file to
+ the saved heap image. This can be useful in some special
+ cases.
+
@@ -4985,5 +5050,5 @@
@@ -5032,5 +5097,5 @@
@@ -5090,5 +5155,5 @@
@@ -5264,5 +5329,5 @@
@@ -5298,5 +5363,5 @@
@@ -5384,5 +5449,5 @@
@@ -5684,5 +5749,5 @@
@@ -5706,5 +5771,5 @@
@@ -5732,5 +5797,5 @@
@@ -5758,5 +5823,5 @@
@@ -5789,5 +5854,5 @@
@@ -5816,5 +5881,5 @@
@@ -5839,5 +5904,5 @@
@@ -5866,5 +5931,5 @@
@@ -5893,5 +5958,5 @@
@@ -6060,5 +6125,5 @@
@@ -6085,5 +6150,5 @@
@@ -6121,5 +6186,5 @@
@@ -6156,5 +6221,5 @@
@@ -6187,5 +6252,5 @@
@@ -6417,5 +6482,5 @@
-
+
BUILD-APPLICATION &key
( process-suspend was previously called
@@ -7744,5 +7809,5 @@
@@ -7797,5 +7862,5 @@
It would be nice to have more discussion of what it means
@@ -7941,5 +8006,5 @@
It would probably be better for result
@@ -8080,10 +8145,10 @@
This should arguably be SETFable, but doesn't seem to
@@ -8372,5 +8437,5 @@
Advises the OS scheduler that the current thread has nothing
@@ -8381,10 +8446,10 @@
This is a holdover from the days of cooperative
@@ -8409,5 +8474,5 @@
Executes body
@@ -8590,5 +8655,5 @@
Creates and returns an object of type CCL::READ-WRITE-LOCK.
@@ -8796,10 +8861,10 @@
There probably should be some way to
@@ -8824,5 +8889,5 @@
result should probably be interpreted
@@ -8987,5 +9052,5 @@
result should probably be interpreted
@@ -9031,5 +9096,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -9081,5 +9146,5 @@
@@ -9127,5 +9192,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -9135,5 +9200,5 @@
@@ -9178,5 +9243,5 @@
process---a process, typically created by process-run-function or by make-process Waits for the specified process to terminate. If the
@@ -9445,5 +9510,5 @@
address-family---The address/protocol family of this socket. Currently
@@ -9545,5 +9610,5 @@
Creates and returns a new socket Extracts the first connection on the queue of pending
@@ -9598,5 +9663,5 @@
Converts a dotted-string representation of a host address to
@@ -9626,5 +9691,5 @@
ipaddr---A 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into octets. ipaddr---a 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into a host name
@@ -9681,5 +9746,5 @@
host---Specifies the host. It can be either a host name
@@ -9689,5 +9754,5 @@
Converts a host spec in any of the acceptable formats into a
@@ -9709,5 +9774,5 @@
port---Specifies the port. It can be either a string, such as
@@ -9718,5 +9783,5 @@
Finds the port number for the specified port and protocol Reads a UDP packet from a socket. If no packets are
@@ -9792,5 +9857,5 @@
Send a UDP packet over a socket. socket---The socket to shut down (typically a tcp-stream) Shuts down part of a bidirectional connection. This is
@@ -9854,10 +9919,10 @@
Returns the native OS's representation of the socket, or
@@ -9884,10 +9949,10 @@
Returns the 32-bit unsigned IP address of the remote host,
@@ -9909,10 +9974,10 @@
Returns the remote port number, or NIL if the socket is not
@@ -9934,10 +9999,10 @@
Returns 32-bit unsigned IP address of the local host. Returns the local port number Returns :internet or :file, as appropriate. Returns :active for tcp-stream, :passive for
@@ -10031,10 +10096,10 @@
Returns the socket format as specified by the :format
@@ -10056,10 +10121,10 @@
returns :stream for tcp-stream and listener-socket, and
@@ -10080,10 +10145,10 @@
simple-error The OS error code of the error A symbol representing the error code in a more
@@ -10157,10 +10222,10 @@
A string describing the context where the error happened. On
@@ -10183,5 +10248,5 @@
The close generic function can be applied to sockets. It
@@ -10215,5 +10280,5 @@
executes body with var bound to the result of applying
@@ -10354,5 +10419,5 @@
program---A string or pathname which denotes an executable file.
@@ -10405,5 +10470,5 @@
Runs the specified program in an external (Unix) process,
@@ -10425,5 +10490,5 @@
proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM. Sends the specified "signal" to the specified
@@ -10454,10 +10519,10 @@
Returns the process id assigned to
@@ -10481,10 +10546,10 @@
Returns the stream created when the input argument to
@@ -10507,10 +10572,10 @@
Returns the stream created when the output argument to
@@ -10534,10 +10599,10 @@
Returns the stream created when the error argument to
@@ -10561,10 +10626,10 @@
Returns, as multiple values, a keyword denoting the status
@@ -10596,5 +10661,5 @@
A stream that is associated with a file descriptor has
attributes and accessors:
@@ -10885,5 +10950,5 @@
stream---a stream, presumably a fundamental-input-stream. Should try to read up to count elements from stream into the
@@ -11436,5 +11501,5 @@
stream---a stream, presumably a fundamental-output-stream. should try to write the first count elements of list to
@@ -11467,5 +11532,5 @@
stream---a stream, presumably a fundamental-input-stream should try to read successive elements from stream into
@@ -11506,5 +11571,5 @@
stream---a stream, presumably a fundamental-output-stream should try to write successive elements of vector to stream,
@@ -11544,5 +11609,5 @@
Returns the file descriptor associated with
@@ -11585,5 +11650,5 @@
stream---An input stream. The method defined on
@@ -11617,5 +11682,5 @@
Writes max-octets octets to stream from ivector, starting at
@@ -11623,5 +11688,5 @@
CHUD:*SHARK-CONFIG-FILE*
[Variable] CHUD:METER form &key (reset nil)
+ CHUD:METER form &key (reset nil)
(debug-output nil) [Macro] Executes FORM (an arbitrary lisp form) and returns whatever
@@ -13911,5 +13976,5 @@
Reads a symbol from the current input stream, with *PACKAGE*
@@ -16004,5 +16069,5 @@
In compile-file. fasl files store the
@@ -1756,5 +1756,5 @@
see
Table 3.1, âPlatform-specific filename conventionsâ ccl/lisp-kernel/; each such
-
+
contains a Makefile and may contain some auxiliary files (linker
scripts, etc.) that are used to build the lisp kernel on a
@@ -2608,5 +2608,5 @@
keyword
global-value}* {spec |
@@ -3052,15 +3052,15 @@
spec &key {keyword value}* [Function]
ccl and homeCCL logical host should point to the
ccl directory. It is used for a variety of
@@ -4509,5 +4509,5 @@
platforms.pathname
@@ -4569,5 +4569,5 @@
a memory error.displaced-array
@@ -4581,5 +4581,5 @@
target is an empty vector (of length zero).pathname
@@ -4591,5 +4591,5 @@
bytes.displaced-array
@@ -4630,5 +4630,5 @@
static.CCL:SAVE-APPLICATION, which creates a file
@@ -4764,5 +4764,5 @@
converted, because address 0 can always be relied upon to refer to
the same thing.CCL:+NULL-PTR+
refers to a MACPTR object that points to address 0.ccl64 script.
filename
@@ -4873,4 +4873,69 @@
purify before
+ saving the heap image. This moves certain objects that
+ are unlikely to become garbage to a special memory area
+ that is not scanned by the GC (since it is expected that
+ the GC wouldn't find anything to collect).
+ impurify before
+ saving the heap image. (If both :impurify
+ and :purify are true, first
+ impurify is done, and then purify.)
+ impurify moves objects in certain special memory
+ areas into the regular dynamic heap, where they will be scanned
+ by the GC.
+ t means to prepend
+ the lisp kernel binary that the lisp started with.
+ Otherwise, the value of :prepend-kernel
+ should be a pathname designator for the file to be
+ prepended.
+ name "MyApplication")
@@ -6849,5 +6914,5 @@
@@ -12424,5 +12489,5 @@
CCL 1.2 and later, the #& reader macro can be used to
@@ -16063,5 +16128,5 @@