The following terms are used in subsequent sections; it may be helpful to refer to these definitions.
-fasl
+ fasl
files are the object files produced
by The Lisp
+ The Lisp
kernel is a C program with a fair amount of
platform-specific assembly language code. Its basic job is to
@@ -1766,5 +1766,5 @@
files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A heap
+ A heap
image is a file that can be quickly mapped into a
process's address space. Conceptually, it's not too different
@@ -1777,5 +1777,5 @@
standard full heap image files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A bootstrapping image is a minimal
+ A bootstrapping image is a minimal
heap image used in the process of building Clozure CL itself. The
bootstrapping image contains just enough code to load the rest
@@ -1789,5 +1789,5 @@
as-yet-unsupported ones) has a uniquely named subdirectory of
-
+
TRACE {
-
+
CCL:*TRACE-LEVEL* [Variable]
Variable bound to the current nesting level during execution of before and after trace actions. The default printing actions use it to determine the amount of indentation.
-
+
CCL:*TRACE-MAX-INDENT* [Variable]
The default before and after print actions will not indent by more than the value of ccl:*trace-max-indent* regardless of the current trace level.
-
+
CCL:TRACE-FUNCTION
-
+
CCL:*TRACE-BAR-FREQUENCY* [Variable]
@@ -3215,5 +3215,5 @@
@@ -3254,5 +3254,5 @@
@@ -3426,5 +3426,5 @@
The value of this variable is used when :EXTERNAL-FORMAT is
@@ -3452,5 +3452,5 @@
The value of this variable is used when an external-format
@@ -3484,5 +3484,5 @@
domain---This is used to indicate where the external
@@ -3518,5 +3518,5 @@
Despite the function's name, it doesn't necessarily create a
@@ -3691,5 +3691,5 @@
@@ -4253,5 +4253,5 @@
@@ -4270,4 +4270,10 @@
Returns, as multiple values, the decoded string and the position in
vector where the decoding ended.
+
+ Sequences of octets in vector that cannot be
+ decoded into characters according to
+ external-format will be decoded as
+ #\Replacement_Character.
@@ -4318,4 +4324,11 @@
If vector-offset is supplied, data will be written
into the output vector starting at that offset.
+
+ Characters in string that cannot be encoded
+ into external-format will be replaced with an
+ encoding-dependent replacement character
+ (#\Replacement_Character or #\Sub) before being encoded and written
+ into the output vector.
Clozure CL sets up logical pathname translations for logical hosts: The
-
+
CCL:MAP-FILE-TO-IVECTOR
-
+
CCL:UNMAP-IVECTOR
-
+
CCL:MAP-FILE-TO-OCTET-VECTOR
-
+
CCL:UNMAP-OCTET-VECTOR
Clozure CL provides the
function As of Clozure CL 1.2, the constant
-
+
SAVE-APPLICATION
@@ -4972,5 +4985,5 @@
@@ -5019,5 +5032,5 @@
@@ -5077,5 +5090,5 @@
@@ -5251,5 +5264,5 @@
@@ -5285,5 +5298,5 @@
@@ -5371,5 +5384,5 @@
@@ -5671,5 +5684,5 @@
@@ -5693,5 +5706,5 @@
@@ -5719,5 +5732,5 @@
@@ -5745,5 +5758,5 @@
@@ -5776,5 +5789,5 @@
@@ -5803,5 +5816,5 @@
@@ -5826,5 +5839,5 @@
@@ -5853,5 +5866,5 @@
@@ -5880,5 +5893,5 @@
@@ -6047,5 +6060,5 @@
@@ -6072,5 +6085,5 @@
@@ -6108,5 +6121,5 @@
@@ -6143,5 +6156,5 @@
@@ -6174,5 +6187,5 @@
@@ -6404,5 +6417,5 @@
-
+
BUILD-APPLICATION &key
( process-suspend was previously called
@@ -7731,5 +7744,5 @@
@@ -7784,5 +7797,5 @@
It would be nice to have more discussion of what it means
@@ -7928,5 +7941,5 @@
It would probably be better for result
@@ -8067,10 +8080,10 @@
This should arguably be SETFable, but doesn't seem to
@@ -8359,5 +8372,5 @@
Advises the OS scheduler that the current thread has nothing
@@ -8368,10 +8381,10 @@
This is a holdover from the days of cooperative
@@ -8396,5 +8409,5 @@
Executes body
@@ -8577,5 +8590,5 @@
Creates and returns an object of type CCL::READ-WRITE-LOCK.
@@ -8783,10 +8796,10 @@
There probably should be some way to
@@ -8811,5 +8824,5 @@
result should probably be interpreted
@@ -8974,5 +8987,5 @@
result should probably be interpreted
@@ -9018,5 +9031,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -9068,5 +9081,5 @@
@@ -9114,5 +9127,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -9122,5 +9135,5 @@
@@ -9165,5 +9178,5 @@
process---a process, typically created by process-run-function or by make-process Waits for the specified process to terminate. If the
@@ -9432,5 +9445,5 @@
address-family---The address/protocol family of this socket. Currently
@@ -9532,5 +9545,5 @@
Creates and returns a new socket Extracts the first connection on the queue of pending
@@ -9585,5 +9598,5 @@
Converts a dotted-string representation of a host address to
@@ -9613,5 +9626,5 @@
ipaddr---A 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into octets. ipaddr---a 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into a host name
@@ -9668,5 +9681,5 @@
host---Specifies the host. It can be either a host name
@@ -9676,5 +9689,5 @@
Converts a host spec in any of the acceptable formats into a
@@ -9696,5 +9709,5 @@
port---Specifies the port. It can be either a string, such as
@@ -9705,5 +9718,5 @@
Finds the port number for the specified port and protocol Reads a UDP packet from a socket. If no packets are
@@ -9779,5 +9792,5 @@
Send a UDP packet over a socket. socket---The socket to shut down (typically a tcp-stream) Shuts down part of a bidirectional connection. This is
@@ -9841,10 +9854,10 @@
Returns the native OS's representation of the socket, or
@@ -9871,10 +9884,10 @@
Returns the 32-bit unsigned IP address of the remote host,
@@ -9896,10 +9909,10 @@
Returns the remote port number, or NIL if the socket is not
@@ -9921,10 +9934,10 @@
Returns 32-bit unsigned IP address of the local host. Returns the local port number Returns :internet or :file, as appropriate. Returns :active for tcp-stream, :passive for
@@ -10018,10 +10031,10 @@
Returns the socket format as specified by the :format
@@ -10043,10 +10056,10 @@
returns :stream for tcp-stream and listener-socket, and
@@ -10067,10 +10080,10 @@
simple-error The OS error code of the error A symbol representing the error code in a more
@@ -10144,10 +10157,10 @@
A string describing the context where the error happened. On
@@ -10170,5 +10183,5 @@
The close generic function can be applied to sockets. It
@@ -10202,5 +10215,5 @@
executes body with var bound to the result of applying
@@ -10341,5 +10354,5 @@
program---A string or pathname which denotes an executable file.
@@ -10392,5 +10405,5 @@
Runs the specified program in an external (Unix) process,
@@ -10412,5 +10425,5 @@
proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM. Sends the specified "signal" to the specified
@@ -10441,10 +10454,10 @@
Returns the process id assigned to
@@ -10468,10 +10481,10 @@
Returns the stream created when the input argument to
@@ -10494,10 +10507,10 @@
Returns the stream created when the output argument to
@@ -10521,10 +10534,10 @@
Returns the stream created when the error argument to
@@ -10548,10 +10561,10 @@
Returns, as multiple values, a keyword denoting the status
@@ -10583,5 +10596,5 @@
A stream that is associated with a file descriptor has
attributes and accessors:
@@ -10872,5 +10885,5 @@
stream---a stream, presumably a fundamental-input-stream. Should try to read up to count elements from stream into the
@@ -11423,5 +11436,5 @@
stream---a stream, presumably a fundamental-output-stream. should try to write the first count elements of list to
@@ -11454,5 +11467,5 @@
stream---a stream, presumably a fundamental-input-stream should try to read successive elements from stream into
@@ -11493,5 +11506,5 @@
stream---a stream, presumably a fundamental-output-stream should try to write successive elements of vector to stream,
@@ -11531,5 +11544,5 @@
Returns the file descriptor associated with
@@ -11572,5 +11585,5 @@
stream---An input stream. The method defined on
@@ -11604,5 +11617,5 @@
Writes max-octets octets to stream from ivector, starting at
@@ -11610,5 +11623,5 @@
CHUD:*SHARK-CONFIG-FILE*
[Variable] CHUD:METER form &key (reset nil)
+ CHUD:METER form &key (reset nil)
(debug-output nil) [Macro] Executes FORM (an arbitrary lisp form) and returns whatever
@@ -13898,5 +13911,5 @@
Reads a symbol from the current input stream, with *PACKAGE*
@@ -15991,5 +16004,5 @@
In In compile-file. fasl files store the
@@ -1756,5 +1756,5 @@
see
Table 3.1, âPlatform-specific filename conventionsâ ccl/lisp-kernel/; each such
-
+
contains a Makefile and may contain some auxiliary files (linker
scripts, etc.) that are used to build the lisp kernel on a
@@ -2608,5 +2608,5 @@
keyword
global-value}* {spec |
@@ -3052,15 +3052,15 @@
spec &key {keyword value}* [Function]
ccl and homeCCL logical host should point to the
ccl directory. It is used for a variety of
@@ -4496,5 +4509,5 @@
platforms.pathname
@@ -4556,5 +4569,5 @@
a memory error.displaced-array
@@ -4568,5 +4581,5 @@
target is an empty vector (of length zero).pathname
@@ -4578,5 +4591,5 @@
bytes.displaced-array
@@ -4617,5 +4630,5 @@
static.CCL:SAVE-APPLICATION, which creates a file
@@ -4751,5 +4764,5 @@
converted, because address 0 can always be relied upon to refer to
the same thing.CCL:+NULL-PTR+
refers to a MACPTR object that points to address 0.ccl64 script.
filename
@@ -4898,5 +4911,5 @@
name "MyApplication")
@@ -6836,5 +6849,5 @@
@@ -12411,5 +12424,5 @@
CCL 1.2 and later, the #& reader macro can be used to
@@ -16050,5 +16063,5 @@
CCL 0.14.2 and later, the #? reader macro can be used
@@ -16097,5 +16110,5 @@