The following terms are used in subsequent sections; it may be helpful to refer to these definitions.
-fasl
+ fasl
files are the object files produced
by The Lisp
+ The Lisp
kernel is a C program with a fair amount of
platform-specific assembly language code. Its basic job is to
@@ -1766,5 +1766,5 @@
files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A heap
+ A heap
image is a file that can be quickly mapped into a
process's address space. Conceptually, it's not too different
@@ -1777,5 +1777,5 @@
standard full heap image files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A bootstrapping image is a minimal
+ A bootstrapping image is a minimal
heap image used in the process of building Clozure CL itself. The
bootstrapping image contains just enough code to load the rest
@@ -1789,5 +1789,5 @@
as-yet-unsupported ones) has a uniquely named subdirectory of
-
+
TRACE {
-
+
CCL:*TRACE-LEVEL* [Variable]
Variable bound to the current nesting level during execution of before and after trace actions. The default printing actions use it to determine the amount of indentation.
-
+
CCL:*TRACE-MAX-INDENT* [Variable]
The default before and after print actions will not indent by more than the value of ccl:*trace-max-indent* regardless of the current trace level.
-
+
CCL:TRACE-FUNCTION
-
+
CCL:*TRACE-BAR-FREQUENCY* [Variable]
@@ -3215,5 +3215,5 @@
@@ -3254,5 +3254,5 @@
@@ -3410,9 +3410,60 @@
most a character encoding or a line termination convention, but
never both. EXTERNAL-FORMATs are objects (structures) with three
+ EXTERNAL-FORMATs are objects (structures) with two
read-only fields that can be accessed via the functions:
- EXTERNAL-FORMAT-DOMAIN,
EXTERNAL-FORMAT-LINE-TERMINATION and
EXTERNAL-FORMAT-CHARACTER-ENCODING.
+
+ The value of this variable is used when :EXTERNAL-FORMAT is
+ unspecified or specified as :DEFAULT. It can
+ meaningfully be given any value that can be used as an
+ external-format (except for the value :DEFAULT.)
+ The initial value of this variable
+ in Clozure CL is
+
+ The value of this variable is used when an external-format
+ doesn't specify a line-termination convention (or specifies
+ it as :DEFAULT.) It can meaningfully be given any value
+ that can be used as a line termination keyword
+ (see Section 4.5.3, âLine Termination Keywordsâ).
+ The initial value of this variable
+ in Clozure CL is
domain---This is used to indicate where the external
@@ -3467,5 +3518,5 @@
Despite the function's name, it doesn't necessarily create a
@@ -3599,6 +3650,11 @@
and if a
@@ -4197,5 +4253,5 @@
@@ -4240,5 +4296,5 @@
@@ -4286,5 +4342,5 @@
Clozure CL sets up logical pathname translations for logical hosts: The
-
+
CCL:MAP-FILE-TO-IVECTOR
-
+
CCL:UNMAP-IVECTOR
-
+
CCL:MAP-FILE-TO-OCTET-VECTOR
-
+
CCL:UNMAP-OCTET-VECTOR
Clozure CL provides the
function As of Clozure CL 1.2, the constant
-
+
SAVE-APPLICATION
@@ -4916,5 +4972,5 @@
@@ -4963,5 +5019,5 @@
@@ -5021,5 +5077,5 @@
@@ -5195,5 +5251,5 @@
@@ -5229,5 +5285,5 @@
@@ -5315,5 +5371,5 @@
@@ -5615,5 +5671,5 @@
@@ -5637,5 +5693,5 @@
@@ -5663,5 +5719,5 @@
@@ -5689,5 +5745,5 @@
@@ -5720,5 +5776,5 @@
@@ -5747,5 +5803,5 @@
@@ -5770,5 +5826,5 @@
@@ -5797,5 +5853,5 @@
@@ -5824,5 +5880,5 @@
@@ -5991,5 +6047,5 @@
@@ -6016,5 +6072,5 @@
@@ -6052,5 +6108,5 @@
@@ -6087,5 +6143,5 @@
@@ -6118,5 +6174,5 @@
@@ -6348,5 +6404,5 @@
-
+
BUILD-APPLICATION &key
( name---a string, used to identify the process. initial-bindings---an alist of (symbol .
valueform) pairs, which can be
@@ -7568,5 +7628,5 @@
process-suspend was previously called
@@ -7671,5 +7731,5 @@
@@ -7724,5 +7784,5 @@
It would be nice to have more discussion of what it means
@@ -7868,5 +7928,5 @@
It would probably be better for result
@@ -8007,10 +8067,10 @@
This should arguably be SETFable, but doesn't seem to
@@ -8299,5 +8359,5 @@
Advises the OS scheduler that the current thread has nothing
@@ -8308,10 +8368,10 @@
This is a holdover from the days of cooperative
@@ -8336,5 +8396,5 @@
Executes body
@@ -8517,5 +8577,5 @@
Creates and returns an object of type CCL::READ-WRITE-LOCK.
@@ -8723,10 +8783,10 @@
There probably should be some way to
@@ -8751,5 +8811,5 @@
result should probably be interpreted
@@ -8914,5 +8974,5 @@
result should probably be interpreted
@@ -8958,5 +9018,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -9008,5 +9068,5 @@
@@ -9054,5 +9114,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -9062,5 +9122,5 @@
@@ -9105,5 +9165,5 @@
process---a process, typically created by process-run-function or by make-process Waits for the specified process to terminate. If the
@@ -9372,5 +9432,5 @@
address-family---The address/protocol family of this socket. Currently
@@ -9472,5 +9532,5 @@
Creates and returns a new socket Extracts the first connection on the queue of pending
@@ -9525,5 +9585,5 @@
Converts a dotted-string representation of a host address to
@@ -9553,5 +9613,5 @@
ipaddr---A 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into octets. ipaddr---a 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into a host name
@@ -9608,5 +9668,5 @@
host---Specifies the host. It can be either a host name
@@ -9616,5 +9676,5 @@
Converts a host spec in any of the acceptable formats into a
@@ -9636,5 +9696,5 @@
port---Specifies the port. It can be either a string, such as
@@ -9645,5 +9705,5 @@
Finds the port number for the specified port and protocol Reads a UDP packet from a socket. If no packets are
@@ -9719,5 +9779,5 @@
Send a UDP packet over a socket. socket---The socket to shut down (typically a tcp-stream) Shuts down part of a bidirectional connection. This is
@@ -9781,10 +9841,10 @@
Returns the native OS's representation of the socket, or
@@ -9811,10 +9871,10 @@
Returns the 32-bit unsigned IP address of the remote host,
@@ -9836,10 +9896,10 @@
Returns the remote port number, or NIL if the socket is not
@@ -9861,10 +9921,10 @@
Returns 32-bit unsigned IP address of the local host. Returns the local port number Returns :internet or :file, as appropriate. Returns :active for tcp-stream, :passive for
@@ -9958,10 +10018,10 @@
Returns the socket format as specified by the :format
@@ -9983,10 +10043,10 @@
returns :stream for tcp-stream and listener-socket, and
@@ -10007,10 +10067,10 @@
simple-error The OS error code of the error A symbol representing the error code in a more
@@ -10084,10 +10144,10 @@
A string describing the context where the error happened. On
@@ -10110,5 +10170,5 @@
The close generic function can be applied to sockets. It
@@ -10142,5 +10202,5 @@
executes body with var bound to the result of applying
@@ -10281,5 +10341,5 @@
program---A string or pathname which denotes an executable file.
@@ -10332,5 +10392,5 @@
Runs the specified program in an external (Unix) process,
@@ -10352,5 +10412,5 @@
proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM. Sends the specified "signal" to the specified
@@ -10381,10 +10441,10 @@
Returns the process id assigned to
@@ -10408,10 +10468,10 @@
Returns the stream created when the input argument to
@@ -10434,10 +10494,10 @@
Returns the stream created when the output argument to
@@ -10461,10 +10521,10 @@
Returns the stream created when the error argument to
@@ -10488,10 +10548,10 @@
Returns, as multiple values, a keyword denoting the status
@@ -10523,5 +10583,5 @@
A stream that is associated with a file descriptor has
attributes and accessors:
@@ -10812,5 +10872,5 @@
stream---a stream, presumably a fundamental-input-stream. Should try to read up to count elements from stream into the
@@ -11363,5 +11423,5 @@
stream---a stream, presumably a fundamental-output-stream. should try to write the first count elements of list to
@@ -11394,5 +11454,5 @@
stream---a stream, presumably a fundamental-input-stream should try to read successive elements from stream into
@@ -11433,5 +11493,5 @@
stream---a stream, presumably a fundamental-output-stream should try to write successive elements of vector to stream,
@@ -11471,5 +11531,5 @@
Returns the file descriptor associated with
@@ -11512,5 +11572,5 @@
stream---An input stream. The method defined on
@@ -11544,5 +11604,5 @@
Writes max-octets octets to stream from ivector, starting at
@@ -11550,5 +11610,5 @@
CHUD:*SHARK-CONFIG-FILE*
[Variable] CHUD:METER form &key (reset nil)
+ CHUD:METER form &key (reset nil)
(debug-output nil) [Macro] Executes FORM (an arbitrary lisp form) and returns whatever
@@ -13838,5 +13898,5 @@
Reads a symbol from the current input stream, with *PACKAGE*
@@ -15931,5 +15991,5 @@
In In In compile-file. fasl files store the
@@ -1756,5 +1756,5 @@
see
Table 3.1, âPlatform-specific filename conventionsâ ccl/lisp-kernel/; each such
-
+
contains a Makefile and may contain some auxiliary files (linker
scripts, etc.) that are used to build the lisp kernel on a
@@ -2608,5 +2608,5 @@
keyword
global-value}* {spec |
@@ -3052,15 +3052,15 @@
spec &key {keyword value}* [Function]
:UNIX, which is equivalent to
+ (:LINE-TERMINATION :UNIX), among other
+ things. :UNIX.
+ #\Return character occurs before any
#\Linefeed character, then the line termination
- type is set to :MACOS, otherwise it is set to
- :UNIX.:WINDOWS if that
+ #\Return character is immediately followed by a
+ #\Linefeed character and to :MACOS
+ otherwise. If a #\Return character isn't found in
+ the buffer or if #\Return is preceded by
+ #\Linefeed, the file's line terminationt type
+ is set to :UNIX.
ccl and homeCCL logical host should point to the
ccl directory. It is used for a variety of
@@ -4440,5 +4496,5 @@
platforms.pathname
@@ -4500,5 +4556,5 @@
a memory error.displaced-array
@@ -4512,5 +4568,5 @@
target is an empty vector (of length zero).pathname
@@ -4522,5 +4578,5 @@
bytes.displaced-array
@@ -4561,5 +4617,5 @@
static.CCL:SAVE-APPLICATION, which creates a file
@@ -4695,5 +4751,5 @@
converted, because address 0 can always be relied upon to refer to
the same thing.CCL:+NULL-PTR+
refers to a MACPTR object that points to address 0.ccl64 script.
filename
@@ -4842,5 +4898,5 @@
name "MyApplication")
@@ -6780,5 +6836,5 @@
@@ -12351,5 +12411,5 @@
CCL 1.2 and later, the #& reader macro can be used to
@@ -15990,5 +16050,5 @@
CCL 0.14.2 and later, the #? reader macro can be used
@@ -16037,5 +16097,5 @@
CCL 1.2 and later, the #/ reader macro can be used to
@@ -16140,5 +16200,5 @@