The following terms are used in subsequent sections; it may be helpful to refer to these definitions.
-fasl
+ fasl
files are the object files produced
by The Lisp
+ The Lisp
kernel is a C program with a fair amount of
platform-specific assembly language code. Its basic job is to
@@ -1766,5 +1766,5 @@
files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A heap
+ A heap
image is a file that can be quickly mapped into a
process's address space. Conceptually, it's not too different
@@ -1777,5 +1777,5 @@
standard full heap image files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A bootstrapping image is a minimal
+ A bootstrapping image is a minimal
heap image used in the process of building Clozure CL itself. The
bootstrapping image contains just enough code to load the rest
@@ -1789,5 +1789,5 @@
as-yet-unsupported ones) has a uniquely named subdirectory of
Given that you now have everything you need, do the
- following in a running Clozure CL to bring your Lisp system
- completely up to date. You now have everything you need. Start up
+ Clozure CL with the
-
+
TRACE {
-
+
CCL:*TRACE-LEVEL* [Variable]
Variable bound to the current nesting level during execution of before and after trace actions. The default printing actions use it to determine the amount of indentation.
-
+
CCL:*TRACE-MAX-INDENT* [Variable]
The default before and after print actions will not indent by more than the value of ccl:*trace-max-indent* regardless of the current trace level.
-
+
CCL:TRACE-FUNCTION compile-file. fasl files store the
@@ -1756,5 +1756,5 @@
see
Table 3.1, âPlatform-specific filename conventionsâ ccl/lisp-kernel/; each such
-
+
contains a Makefile and may contain some auxiliary files (linker
scripts, etc.) that are used to build the lisp kernel on a
@@ -2020,7 +2020,9 @@
- -n or --no-init
+ option to avoid potential interference from code in your init file,
+ and evaluate the following form to bring your Lisp system
+ up to date.
? (ccl:rebuild-ccl :full t)
@@ -2606,5 +2608,5 @@
keyword
global-value}* {spec |
@@ -3050,15 +3052,15 @@
spec &key {keyword value}* [Function]
- + CCL:*TRACE-BAR-FREQUENCY* [Variable]
@@ -3133,5 +3135,5 @@@@ -3213,5 +3215,5 @@
@@ -3252,5 +3254,5 @@
@@ -3431,5 +3433,5 @@
domain---This is used to indicate where the external @@ -3465,5 +3467,5 @@
Despite the function's name, it doesn't necessarily create a @@ -3633,5 +3635,5 @@
@@ -3649,5 +3651,5 @@ @@ -3677,5 +3679,5 @@ @@ -3699,5 +3701,5 @@@@ -4195,5 +4197,5 @@
@@ -4238,5 +4240,5 @@
@@ -4284,5 +4286,5 @@
Clozure CL sets up logical pathname translations for logical hosts: ccl and home
The CCL logical host should point to the
ccl directory. It is used for a variety of
@@ -4438,5 +4440,5 @@
platforms.
-
+
CCL:MAP-FILE-TO-IVECTOR
pathname
@@ -4498,5 +4500,5 @@
a memory error.
-
+
CCL:UNMAP-IVECTOR
displaced-array
@@ -4510,5 +4512,5 @@
target is an empty vector (of length zero).
-
+
CCL:MAP-FILE-TO-OCTET-VECTOR
pathname
@@ -4520,5 +4522,5 @@
bytes.
-
+
CCL:UNMAP-OCTET-VECTOR
displaced-array
@@ -4559,5 +4561,5 @@
static.
Clozure CL provides the
function CCL:SAVE-APPLICATION, which creates a file
@@ -4693,5 +4695,5 @@
converted, because address 0 can always be relied upon to refer to
the same thing.
As of Clozure CL 1.2, the constant CCL:+NULL-PTR+
refers to a MACPTR object that points to address 0.
opencml64 script.
-
+
SAVE-APPLICATION
@@ -4902,5 +4904,5 @@
@@ -4949,5 +4951,5 @@
@@ -5007,5 +5009,5 @@
@@ -5181,5 +5183,5 @@
@@ -5215,5 +5217,5 @@
@@ -5301,5 +5303,5 @@
@@ -5601,5 +5603,5 @@
@@ -5623,5 +5625,5 @@
@@ -5649,5 +5651,5 @@
@@ -5675,5 +5677,5 @@
@@ -5706,5 +5708,5 @@
@@ -5733,5 +5735,5 @@
@@ -5756,5 +5758,5 @@
@@ -5783,5 +5785,5 @@
@@ -5810,5 +5812,5 @@
@@ -5977,5 +5979,5 @@
@@ -6002,5 +6004,5 @@
@@ -6038,5 +6040,5 @@
@@ -6073,5 +6075,5 @@
@@ -6307,5 +6309,5 @@
-
+
BUILD-APPLICATION &key
( process-suspend was previously called
@@ -7630,5 +7632,5 @@
@@ -7683,5 +7685,5 @@
It would be nice to have more discussion of what it means
@@ -7827,5 +7829,5 @@
It would probably be better for result
@@ -7966,10 +7968,10 @@
This should arguably be SETFable, but doesn't seem to
@@ -8258,5 +8260,5 @@
Advises the OS scheduler that the current thread has nothing
@@ -8267,10 +8269,10 @@
This is a holdover from the days of cooperative
@@ -8295,5 +8297,5 @@
Creates and returns an object of type CCL::READ-WRITE-LOCK.
@@ -8652,10 +8654,10 @@
There probably should be some way to
@@ -8680,5 +8682,5 @@
result should probably be interpreted
@@ -8843,5 +8845,5 @@
result should probably be interpreted
@@ -8887,5 +8889,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -8937,5 +8939,5 @@
@@ -8983,5 +8985,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -8991,5 +8993,5 @@
@@ -9034,5 +9036,5 @@
process---a process, typically created by process-run-function or by make-process Waits for the specified process to terminate. If the
@@ -9301,5 +9303,5 @@
address-family---The address/protocol family of this socket. Currently
@@ -9401,5 +9403,5 @@
Creates and returns a new socket Extracts the first connection on the queue of pending
@@ -9454,5 +9456,5 @@
Converts a dotted-string representation of a host address to
@@ -9482,5 +9484,5 @@
ipaddr---A 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into octets. ipaddr---a 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into a host name
@@ -9537,5 +9539,5 @@
host---Specifies the host. It can be either a host name
@@ -9545,5 +9547,5 @@
Converts a host spec in any of the acceptable formats into a
@@ -9565,5 +9567,5 @@
port---Specifies the port. It can be either a string, such as
@@ -9574,5 +9576,5 @@
Finds the port number for the specified port and protocol Reads a UDP packet from a socket. If no packets are
@@ -9648,5 +9650,5 @@
Send a UDP packet over a socket. socket---The socket to shut down (typically a tcp-stream) Shuts down part of a bidirectional connection. This is
@@ -9710,10 +9712,10 @@
Returns the native OS's representation of the socket, or
@@ -9740,10 +9742,10 @@
Returns the 32-bit unsigned IP address of the remote host,
@@ -9765,10 +9767,10 @@
Returns the remote port number, or NIL if the socket is not
@@ -9790,10 +9792,10 @@
Returns 32-bit unsigned IP address of the local host. Returns the local port number Returns :internet or :file, as appropriate. Returns :active for tcp-stream, :passive for
@@ -9887,10 +9889,10 @@
Returns the socket format as specified by the :format
@@ -9912,10 +9914,10 @@
returns :stream for tcp-stream and listener-socket, and
@@ -9936,10 +9938,10 @@
simple-error The OS error code of the error A symbol representing the error code in a more
@@ -10013,10 +10015,10 @@
A string describing the context where the error happened. On
@@ -10039,5 +10041,5 @@
The close generic function can be applied to sockets. It
@@ -10071,5 +10073,5 @@
executes body with var bound to the result of applying
@@ -10210,5 +10212,5 @@
program---A string or pathname which denotes an executable file.
@@ -10261,5 +10263,5 @@
Runs the specified program in an external (Unix) process,
@@ -10281,5 +10283,5 @@
proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM. Sends the specified "signal" to the specified
@@ -10310,10 +10312,10 @@
Returns the process id assigned to
@@ -10337,10 +10339,10 @@
Returns the stream created when the input argument to
@@ -10363,10 +10365,10 @@
Returns the stream created when the output argument to
@@ -10390,10 +10392,10 @@
Returns the stream created when the error argument to
@@ -10417,10 +10419,10 @@
Returns, as multiple values, a keyword denoting the status
@@ -10452,5 +10454,5 @@
A stream that is associated with a file descriptor has
attributes and accessors:
@@ -10741,5 +10743,5 @@
stream---a stream, presumably a fundamental-input-stream. Should try to read up to count elements from stream into the
@@ -11292,5 +11294,5 @@
stream---a stream, presumably a fundamental-output-stream. should try to write the first count elements of list to
@@ -11323,5 +11325,5 @@
stream---a stream, presumably a fundamental-input-stream should try to read successive elements from stream into
@@ -11362,5 +11364,5 @@
stream---a stream, presumably a fundamental-output-stream should try to write successive elements of vector to stream,
@@ -11400,5 +11402,5 @@
Returns the file descriptor associated with
@@ -11441,5 +11443,5 @@
stream---An input stream. The method defined on
@@ -11473,5 +11475,5 @@
Writes max-octets octets to stream from ivector, starting at
@@ -11479,5 +11481,5 @@
-
+
CHUD:*SHARK-CONFIG-FILE* [Variable]
-
+
CHUD:METER form &key (reset nil) (debug-output nil) [Macro]
Reads a symbol from the current input stream, with *PACKAGE*
@@ -15844,5 +15846,5 @@
In In In In If completely is T, sets the
@@ -16118,5 +16120,5 @@
Proclaims name
@@ -16171,5 +16173,5 @@
If name is non-NIL, defines name to be an alias for the
@@ -16213,5 +16215,5 @@
If there is already an EXTERNAL-ENTRY-POINT for
@@ -16254,5 +16256,5 @@
Calls the foreign function at the address obtained by
@@ -16294,5 +16296,5 @@
filename
@@ -4828,5 +4830,5 @@
name "MyApplication")
@@ -6739,5 +6741,5 @@
CCL 1.2 and later, the #& reader macro can be used to
@@ -15903,5 +15905,5 @@
CCL 0.14.2 and later, the #? reader macro can be used
@@ -15950,5 +15952,5 @@
CCL 1.2 and later, the #/ reader macro can be used to
@@ -16053,5 +16055,5 @@
CCL 1.2 and later, the #> reader macro reads
@@ -16082,5 +16084,5 @@