The following terms are used in subsequent sections; it may be helpful to refer to these definitions.
-fasl
+ fasl
files are the object files produced
by The Lisp
+ The Lisp
kernel is a C program with a fair amount of
platform-specific assembly language code. Its basic job is to
@@ -1761,5 +1766,5 @@
files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A heap
+ A heap
image is a file that can be quickly mapped into a
process's address space. Conceptually, it's not too different
@@ -1772,5 +1777,5 @@
standard full heap image files on different platforms; see
Table 3.1, âPlatform-specific filename conventionsâ. A bootstrapping image is a minimal
+ A bootstrapping image is a minimal
heap image used in the process of building Clozure CL itself. The
bootstrapping image contains just enough code to load the rest
@@ -1784,5 +1789,5 @@
as-yet-unsupported ones) has a uniquely named subdirectory of
-
+
TRACE {
-
+
CCL:*TRACE-LEVEL* [Variable]
Variable bound to the current nesting level during execution of before and after trace actions. The default printing actions use it to determine the amount of indentation.
-
+
CCL:*TRACE-MAX-INDENT* [Variable]
The default before and after print actions will not indent by more than the value of ccl:*trace-max-indent* regardless of the current trace level.
-
+
CCL:TRACE-FUNCTION compile-file. fasl files store the
@@ -1751,5 +1756,5 @@
see
Table 3.1, âPlatform-specific filename conventionsâ ccl/lisp-kernel/; each such
-
+
contains a Makefile and may contain some auxiliary files (linker
scripts, etc.) that are used to build the lisp kernel on a
@@ -2562,4 +2567,9 @@
+ keyword
global-value}* {spec |
@@ -3040,15 +3050,15 @@
spec &key {keyword value}* [Function]
- + CCL:*TRACE-BAR-FREQUENCY* [Variable]
@@ -3123,5 +3133,5 @@@@ -3203,5 +3213,5 @@
@@ -3242,5 +3252,5 @@
@@ -3421,5 +3431,5 @@
domain---This is used to indicate where the external @@ -3455,5 +3465,5 @@
Despite the function's name, it doesn't necessarily create a @@ -3623,5 +3633,5 @@
@@ -3639,5 +3649,5 @@ @@ -3667,5 +3677,5 @@ @@ -3689,5 +3699,5 @@@@ -4185,5 +4195,5 @@
@@ -4228,5 +4238,5 @@
@@ -4274,5 +4284,5 @@
Clozure CL sets up logical pathname translations for logical hosts: ccl and home
The CCL logical host should point to the
ccl directory. It is used for a variety of
@@ -4428,5 +4438,5 @@
platforms.
-
+
CCL:MAP-FILE-TO-IVECTOR
pathname
@@ -4488,5 +4498,5 @@
a memory error.
-
+
CCL:UNMAP-IVECTOR
displaced-array
@@ -4500,5 +4510,5 @@
target is an empty vector (of length zero).
-
+
CCL:MAP-FILE-TO-OCTET-VECTOR
pathname
@@ -4510,5 +4520,5 @@
bytes.
-
+
CCL:UNMAP-OCTET-VECTOR
displaced-array
@@ -4549,5 +4559,5 @@
static.
Clozure CL provides the
function CCL:SAVE-APPLICATION, which creates a file
@@ -4683,5 +4693,5 @@
converted, because address 0 can always be relied upon to refer to
the same thing.
As of Clozure CL 1.2, the constant CCL:+NULL-PTR+
refers to a MACPTR object that points to address 0.
opencml64 script.
-
+
SAVE-APPLICATION
@@ -4892,5 +4902,5 @@
@@ -4939,5 +4949,5 @@
@@ -4997,5 +5007,5 @@
@@ -5171,5 +5181,5 @@
@@ -5205,5 +5215,5 @@
@@ -5291,5 +5301,5 @@
@@ -5591,5 +5601,5 @@
@@ -5613,5 +5623,5 @@
@@ -5639,5 +5649,5 @@
@@ -5665,5 +5675,5 @@
@@ -5696,5 +5706,5 @@
@@ -5723,5 +5733,5 @@
@@ -5746,5 +5756,5 @@
@@ -5773,5 +5783,5 @@
@@ -5800,5 +5810,5 @@
@@ -5967,5 +5977,5 @@
@@ -5992,5 +6002,5 @@
+
+
+ Cleanly exit from lisp. If the exit argument is a value of type
+ (signed-byte 32), that value will be passed to the C library
+ function _exit() as the status code. (A value of nil is treated
+ as a zero.)
+
+ Alternatively, exit may be a function of no arguments; this function
+ will be called instead of _exit() to exit the lisp.
+
+ The error-handler argument, if supplied, must be a function of one
+ argument, the condition, that will be called if an error occurs when
+ preparing to quit. The error-handler function should exit the lisp.
+
+
+
+ Wait for the signal with signal number s to be received, or until
+ duration seconds have elapsed. If duration is nil, wait for an
+ indeterminate "very long time" (many years).
+
+ If signal number s is outside the range of valid signals, or is
+ reserved by the lisp for its own use, an error is signaled.
+ (An error is always signaled on Windows systems.)
+
-
+
BUILD-APPLICATION &key
( process-suspend was previously called
@@ -7546,5 +7630,5 @@
@@ -7599,5 +7683,5 @@
It would be nice to have more discussion of what it means
@@ -7743,5 +7827,5 @@
It would probably be better for result
@@ -7882,10 +7966,10 @@
This should arguably be SETFable, but doesn't seem to
@@ -8138,5 +8222,5 @@
Advises the OS scheduler that the current thread has nothing
@@ -8147,10 +8231,10 @@
This is a holdover from the days of cooperative
@@ -8175,5 +8259,5 @@
Creates and returns an object of type CCL::READ-WRITE-LOCK.
@@ -8532,10 +8616,10 @@
There probably should be some way to
@@ -8560,5 +8644,5 @@
result should probably be interpreted
@@ -8723,5 +8807,5 @@
result should probably be interpreted
@@ -8767,5 +8851,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -8817,5 +8901,5 @@
@@ -8863,5 +8947,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -8871,5 +8955,5 @@
@@ -8914,5 +8998,5 @@
process---a process, typically created by process-run-function or by make-process Waits for the specified process to terminate. If the
@@ -9181,5 +9265,5 @@
address-family---The address/protocol family of this socket. Currently
@@ -9281,5 +9365,5 @@
Creates and returns a new socket Extracts the first connection on the queue of pending
@@ -9334,5 +9418,5 @@
Converts a dotted-string representation of a host address to
@@ -9362,5 +9446,5 @@
ipaddr---A 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into octets. ipaddr---a 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into a host name
@@ -9417,5 +9501,5 @@
host---Specifies the host. It can be either a host name
@@ -9425,5 +9509,5 @@
Converts a host spec in any of the acceptable formats into a
@@ -9445,5 +9529,5 @@
port---Specifies the port. It can be either a string, such as
@@ -9454,5 +9538,5 @@
Finds the port number for the specified port and protocol Reads a UDP packet from a socket. If no packets are
@@ -9528,5 +9612,5 @@
Send a UDP packet over a socket. socket---The socket to shut down (typically a tcp-stream) Shuts down part of a bidirectional connection. This is
@@ -9590,10 +9674,10 @@
Returns the native OS's representation of the socket, or
@@ -9620,10 +9704,10 @@
Returns the 32-bit unsigned IP address of the remote host,
@@ -9645,10 +9729,10 @@
Returns the remote port number, or NIL if the socket is not
@@ -9670,10 +9754,10 @@
Returns 32-bit unsigned IP address of the local host. Returns the local port number Returns :internet or :file, as appropriate. Returns :active for tcp-stream, :passive for
@@ -9767,10 +9851,10 @@
Returns the socket format as specified by the :format
@@ -9792,10 +9876,10 @@
returns :stream for tcp-stream and listener-socket, and
@@ -9816,10 +9900,10 @@
simple-error The OS error code of the error A symbol representing the error code in a more
@@ -9893,10 +9977,10 @@
A string describing the context where the error happened. On
@@ -9919,5 +10003,5 @@
The close generic function can be applied to sockets. It
@@ -9951,5 +10035,5 @@
executes body with var bound to the result of applying
@@ -10090,5 +10174,5 @@
program---A string or pathname which denotes an executable file.
@@ -10141,5 +10225,5 @@
Runs the specified program in an external (Unix) process,
@@ -10161,5 +10245,5 @@
proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM. Sends the specified "signal" to the specified
@@ -10190,10 +10274,10 @@
Returns the process id assigned to
@@ -10217,10 +10301,10 @@
Returns the stream created when the input argument to
@@ -10243,10 +10327,10 @@
Returns the stream created when the output argument to
@@ -10270,10 +10354,10 @@
Returns the stream created when the error argument to
@@ -10297,10 +10381,10 @@
Returns, as multiple values, a keyword denoting the status
@@ -10332,5 +10416,5 @@
A stream that is associated with a file descriptor has
attributes and accessors:
@@ -10621,5 +10705,5 @@
stream---a stream, presumably a fundamental-input-stream. Should try to read up to count elements from stream into the
@@ -11172,5 +11256,5 @@
stream---a stream, presumably a fundamental-output-stream. should try to write the first count elements of list to
@@ -11203,5 +11287,5 @@
stream---a stream, presumably a fundamental-input-stream should try to read successive elements from stream into
@@ -11242,5 +11326,5 @@
stream---a stream, presumably a fundamental-output-stream should try to write successive elements of vector to stream,
@@ -11280,5 +11364,5 @@
Returns the file descriptor associated with
@@ -11321,5 +11405,5 @@
stream---An input stream. The method defined on
@@ -11353,5 +11437,5 @@
Writes max-octets octets to stream from ivector, starting at
@@ -11359,5 +11443,5 @@
-
+
CHUD:*SHARK-CONFIG-FILE* [Variable]
-
+
CHUD:METER form &key (reset nil) (debug-output nil) [Macro]
Reads a symbol from the current input stream, with *PACKAGE*
@@ -15724,5 +15808,5 @@
In In In In If completely is T, sets the
@@ -15998,5 +16082,5 @@
Proclaims name
@@ -16051,5 +16135,5 @@
If name is non-NIL, defines name to be an alias for the
@@ -16093,5 +16177,5 @@
If there is already an EXTERNAL-ENTRY-POINT for
@@ -16134,5 +16218,5 @@
Calls the foreign function at the address obtained by
@@ -16174,5 +16258,5 @@
Calls the foreign function at address entrypoint passing the
@@ -16211,5 +16295,5 @@
Calls the foreign function at address entrypoint passing the
@@ -16249,10 +16333,10 @@
Tries to resolve the address of the foreign symbol
@@ -16277,10 +16361,10 @@
filename
@@ -4818,5 +4828,5 @@
name "MyApplication")
@@ -6655,5 +6739,5 @@
CCL 1.2 and later, the #& reader macro can be used to
@@ -15783,5 +15867,5 @@
CCL 0.14.2 and later, the #? reader macro can be used
@@ -15830,5 +15914,5 @@
CCL 1.2 and later, the #/ reader macro can be used to
@@ -15933,5 +16017,5 @@
CCL 1.2 and later, the #> reader macro reads
@@ -15962,5 +16046,5 @@