Index: /trunk/source/doc/ccl-documentation.html =================================================================== --- /trunk/source/doc/ccl-documentation.html (revision 13554) +++ /trunk/source/doc/ccl-documentation.html (revision 13555) @@ -6,5 +6,5 @@ Clozure CL Documentation - + @@ -14,5 +14,5 @@
-

Clozure CL Documentation

+

Clozure CL Documentation

@@ -434,5 +434,5 @@
- 12.12. The Foreign-Function-Interface Dictionary + 12.12. The Foreign-Function-Interface Dictionary
@@ -859,4 +859,9 @@ +
+ + 2.1.5. Microsoft Windows + +
@@ -973,44 +978,28 @@ -

Version 1.3 is the latest stable release of Clozure CL as of April - 2009.

-

Version 1.3 is available for seven platform configurations:

+

As of this writing, Clozure CL 1.4 is the latest release; it was + made in October 2009. For up-to-date information about releases, + please see http://ccl.clozure.com/. +

+

Clozure CL runs on the following platforms:

-

A 64-bit version of Clozure CL requires a 64-bit processor - running a 64-bit OS variant.

-

Additional platform-specific information is given in the - following subsections.

-

Older versions are still available for downloading as - tarballs. Version 1.0 was a stable version released in late 2005. - Version 1.1 was under active development until late 2007. A final - 1.1 release was never made. It was distributed as a series of - development "snapshots" and CVS updates. 1.1 snapshots introduced - support for x86-64 platforms, internal use of Unicode, and many - other features, but were moving targets. Version 1.2 was a stable - version released in April 2008.

@@ -1061,7 +1050,8 @@
-

Clozure CL runs under Mac OS X versions 10.4 and 10.5. +

Clozure CL runs under Mac OS X versions 10.4 and later. Post-1.4 + versions will require at least 10.5.

-

64-bit versions of Clozure CL require 64-bit processors +

64-bit versions of Clozure CL naturally require 64-bit processors (e.g., a G5 or Core 2 processor). Some early Intel-based Macintoshes used processors that don't support @@ -1069,9 +1059,16 @@ the 32-bit Clozure CL will.

-

Clozure CL hasn't been tested under Darwin proper, but - Clozure CL doesn't intentionally use any Mac OS X features beyond - the Darwin subset and therefore it seems likely that Clozure CL - would run on Darwin versions that correspond to recent Mac OS X - versions.

+ +
+
+
+
+

2.1.5. Microsoft Windows

+
+
+
+

+ At the moment, the 32-bit Clozure CL does not run under 64-bit Windows. +

@@ -1110,5 +1107,5 @@ After that you can double-click the Clozure CL application found inside the ccl directory. The disk images are available at - ftp://clozure.com/pub/release/1.3/

+ ftp://clozure.com/pub/release/1.4/

So that Clozure CL can locate its source code, and for other reasons explained in @@ -1136,5 +1133,5 @@ latest, or a specific version of Clozure CL, unless you prefer the Mac Way. Subversion is a source code control system that is - in wide usage. Most modern OSes come with Subversion + in wide use. Many OSes come with Subversion pre-installed. A complete, buildable and runnable set of Clozure CL sources and binaries can be retrieved with a single Subversion command. @@ -1183,9 +1180,9 @@

Release versions of Clozure CL are intended to be stable. While bugs will be fixed in the release branches, enhancements - and new features will go into the trunk. To get the 1.3 release + and new features will go into the trunk. To get the 1.4 release of Clozure CL type:

           
-svn co http://svn.clozure.com/publicsvn/openmcl/release/1.3/darwinx86/ccl
+svn co http://svn.clozure.com/publicsvn/openmcl/release/1.4/darwinx86/ccl

The above command will fetch the complete sources and binaries @@ -1238,5 +1235,5 @@

- If you don't have a C compiler toolchain installed, the + If you don't have a C compiler toolchain installed, rebuild-ccl will not work. Please refer to Chapter 3, Building Clozure CL from its Source Code for @@ -1290,5 +1287,5 @@ -

Tarballs are available at ftp://clozure.com/pub/release/1.3/. Download and extract +

Tarballs are available at ftp://clozure.com/pub/release/1.4/. Download and extract one on your local disk. Then edit the Clozure CL shell script to set the value of CCL_DEFAULT_DIRECTORY and start @@ -1363,9 +1360,6 @@ wherever you usually set environment variables. If there is an existing definition of the variable, the ccl - script will not override it. The shell script sets a local - variable (OPENMCL_KERNEL) to the - standard name of the Clozure CL kernel approprate for the - platform, as determined by 'uname -s'. You might prefer to - set this variable manually in the shell script.

+ script will not override it. +

  • @@ -2004,5 +1998,5 @@

    The following terms are used in subsequent sections; it may be helpful to refer to these definitions.

    -

    fasl +

    fasl files are the object files produced by compile-file. fasl files store the @@ -2015,5 +2009,5 @@ see Table 3.1, “Platform-specific filename conventions”

    -

    The Lisp +

    The Lisp kernel is a C program with a fair amount of platform-specific assembly language code. Its basic job is to @@ -2025,5 +2019,5 @@ files on different platforms; see Table 3.1, “Platform-specific filename conventions”.

    -

    A heap +

    A heap image is a file that can be quickly mapped into a process's address space. Conceptually, it's not too different @@ -2036,5 +2030,5 @@ standard full heap image files on different platforms; see Table 3.1, “Platform-specific filename conventions”.

    -

    A bootstrapping image is a minimal +

    A bootstrapping image is a minimal heap image used in the process of building Clozure CL itself. The bootstrapping image contains just enough code to load the rest @@ -2048,5 +2042,5 @@ as-yet-unsupported ones) has a uniquely named subdirectory of ccl/lisp-kernel/; each such - + contains a Makefile and may contain some auxiliary files (linker scripts, etc.) that are used to build the lisp kernel on a @@ -2850,5 +2844,5 @@

    - + TRACE {keyword global-value}* {spec | @@ -3294,15 +3288,15 @@

    - + CCL:*TRACE-LEVEL* [Variable]

    Variable bound to the current nesting level during execution of before and after trace actions. The default printing actions use it to determine the amount of indentation.

    - + CCL:*TRACE-MAX-INDENT* [Variable]

    The default before and after print actions will not indent by more than the value of ccl:*trace-max-indent* regardless of the current trace level.

    - + CCL:TRACE-FUNCTION spec &key {keyword value}* [Function]

    @@ -3312,5 +3306,5 @@

    - + CCL:*TRACE-PRINT-LEVEL* [Variable]

    @@ -3320,5 +3314,5 @@ explicit printing done by user code.

    - + CCL:*TRACE-PRINT-LENGTH* [Variable]

    @@ -3328,5 +3322,5 @@ explicit printing done by user code.

    - + CCL:*TRACE-BAR-FREQUENCY* [Variable]

    @@ -3452,5 +3446,5 @@
    - +
    Arguments and Values:

    domain---This is used to indicate where the external @@ -3486,5 +3480,5 @@

    - +
    Description:

    Despite the function's name, it doesn't necessarily create a @@ -3654,5 +3648,5 @@

    -

    4.3.4.1. Encoding Problems

    +

    4.3.4.1. Encoding Problems

    @@ -3670,5 +3664,5 @@
    -

    4.3.4.2. Byte Order Marks

    +

    4.3.4.2. Byte Order Marks

    @@ -3698,5 +3692,5 @@
    -

    4.3.4.3. DESCRIBE-CHARACTER-ENCODINGS

    +

    4.3.4.3. DESCRIBE-CHARACTER-ENCODINGS

    @@ -3720,5 +3714,5 @@
    - +
    Description:

    Writes descriptions of all defined character encodings @@ -3729,5 +3723,5 @@

    - +
    See Also:
    Section 4.3.4, “Character Encodings”, Section 4.3.2, “External Formats”, Section 4.3.4.4, “Supported Character Encodings” @@ -4160,5 +4154,5 @@
    -

    4.3.4.5. Encoding and Decoding Strings

    +

    4.3.4.5. Encoding and Decoding Strings

    @@ -4185,5 +4179,5 @@
    - +
    Description:

    @@ -4216,5 +4210,5 @@

    - +
    Description:

    @@ -4259,5 +4253,5 @@

    - +
    Description:

    @@ -4305,5 +4299,5 @@

    - +
    Description:

    @@ -4355,5 +4349,5 @@

    Clozure CL sets up logical pathname translations for logical hosts: ccl and home

    - +

    The CCL logical host should point to the ccl directory. It is used for a variety of @@ -4459,5 +4453,5 @@ platforms.

    - + CCL:MAP-FILE-TO-IVECTOR pathname @@ -4519,5 +4513,5 @@ a memory error.

    - + CCL:UNMAP-IVECTOR displaced-array @@ -4531,5 +4525,5 @@ target is an empty vector (of length zero).

    - + CCL:MAP-FILE-TO-OCTET-VECTOR pathname @@ -4541,5 +4535,5 @@ bytes.

    - + CCL:UNMAP-OCTET-VECTOR displaced-array @@ -4580,5 +4574,5 @@ static.

    - + DEFSTATIC var @@ -4634,5 +4628,5 @@

    - +

    Clozure CL provides the function CCL:SAVE-APPLICATION, which creates a file @@ -4714,5 +4708,5 @@ converted, because address 0 can always be relied upon to refer to the same thing.

    - +

    As of Clozure CL 1.2, the constant CCL:+NULL-PTR+ refers to a MACPTR object that points to address 0.

    @@ -4725,5 +4719,5 @@ or opencml64 script.

    - + SAVE-APPLICATION filename @@ -4849,5 +4843,5 @@

    - +
    Arguments and Values:

    out-file--- @@ -4863,5 +4857,5 @@

    - +
    Description:

    @@ -4923,5 +4917,5 @@

    - +
    Arguments and Values:

    mode--- @@ -4931,5 +4925,5 @@

    - +
    Description:

    @@ -4970,5 +4964,5 @@

    - +
    Arguments and Values:

    rounding-mode--- @@ -4979,5 +4973,5 @@

    - +
    Description:

    @@ -5028,5 +5022,5 @@

    - +
    Arguments and Values:

    object--- @@ -5035,5 +5029,5 @@

    - +
    Description:

    @@ -5202,5 +5196,5 @@

    - +
    Description:

    @@ -5236,5 +5230,5 @@

    - +
    Discussion:

    @@ -5254,5 +5248,5 @@

    - +
    Restarts:

    @@ -5322,5 +5316,5 @@

    -

    4.10.5.1. Fancy arrays

    +

    4.10.5.1. Fancy arrays

    @@ -5349,5 +5343,5 @@
    -

    4.10.5.2. Hash tables

    +

    4.10.5.2. Hash tables

    @@ -5397,5 +5391,5 @@
    -

    4.10.5.3. Lists

    +

    4.10.5.3. Lists

    @@ -5566,5 +5560,5 @@
    - +
    Arguments and Values:

    html--- @@ -5588,5 +5582,5 @@

    - +
    Example:

    @@ -5622,5 +5616,5 @@

    - +
    Summary:

    @@ -5644,5 +5638,5 @@

    - +
    Summary:

    @@ -5670,5 +5664,5 @@

    - +
    Summary:

    @@ -5696,5 +5690,5 @@

    - +
    Summary:

    @@ -5727,5 +5721,5 @@

    - +
    Summary:

    @@ -5754,5 +5748,5 @@

    - +
    Summary:

    @@ -5777,5 +5771,5 @@

    - +
    Summary:

    @@ -5804,5 +5798,5 @@

    - +
    Summary:

    @@ -5831,5 +5825,5 @@

    - +
    Summary:

    @@ -5998,5 +5992,5 @@

    - +
    Summary:

    @@ -6023,5 +6017,5 @@

    - +
    Summary:

    @@ -6254,5 +6248,5 @@

    -

    5.4.2.1. Checking for Updates

    +

    5.4.2.1. Checking for Updates

    @@ -6386,5 +6380,5 @@ the required subsystems, if necessary.

    - + BUILD-APPLICATION &key (name "MyApplication") @@ -6686,5 +6680,5 @@

    - 6.3.2. As of August 2003: + 6.3.2. As of August 2003:
    @@ -6937,5 +6931,5 @@
    -

    6.3.2.  As of August 2003:

    +

    6.3.2.  As of August 2003:

    @@ -7389,5 +7383,5 @@
    - +
    Values:

    result---a list of all lisp processes (threads) @@ -7395,5 +7389,5 @@

    - +
    Description:

    Returns a list of all lisp processes (threads) known @@ -7407,5 +7401,5 @@

    - +
    See Also:
    @@ -7435,5 +7429,5 @@
    - +
    Arguments and Values:

    name---a string, used to identify the process.

    @@ -7474,5 +7468,5 @@
    - +
    Description:

    Creates and returns a new lisp process (thread) with the @@ -7495,5 +7489,5 @@

    - +
    See Also:
    process-preset, process-enable, process-run-function @@ -7514,5 +7508,5 @@
    - +
    Arguments and Values:

    process---a lisp process (thread).

    @@ -7524,5 +7518,5 @@
    - +
    Description:

    Suspends process, preventing it from @@ -7546,10 +7540,10 @@

    - +
    See Also:
    process-resume, process-suspend-count
    - +
    Notes:

    process-suspend was previously called @@ -7577,5 +7571,5 @@

    - +
    Arguments and Values:

    process---a lisp process (thread).

    @@ -7588,5 +7582,5 @@
    - +
    Description:

    Undoes the effect of a previous call to @@ -7599,10 +7593,10 @@

    - +
    See Also:
    process-suspend, process-suspend-count
    - +
    Notes:

    @@ -7630,5 +7624,5 @@

    - +
    Arguments and Values:

    process---a lisp process (thread).

    @@ -7640,5 +7634,5 @@
    - +
    Description:

    An "outstanding" process-suspend call @@ -7655,5 +7649,5 @@

    - +
    See Also:
    process-suspend, process-resume @@ -7676,5 +7670,5 @@
    - +
    Arguments and Values:

    process---a lisp process (thread).

    @@ -7687,5 +7681,5 @@
    - +
    Description:

    Typically used to initialize a newly-created or newly-reset @@ -7701,5 +7695,5 @@

    - +
    See Also:
    make-process, process-enable, process-run-function @@ -7722,5 +7716,5 @@
    - +
    Arguments and Values:

    process---a lisp process (thread).

    @@ -7731,5 +7725,5 @@
    - +
    Description:

    Tries to begin the execution of process. @@ -7748,10 +7742,10 @@

    - +
    See Also:
    make-process, process-preset, process-run-function
    - +
    Notes:

    It would be nice to have more discussion of what it means @@ -7774,5 +7768,5 @@

    - +
    Arguments and Values:

    name---a string, used to identify the process. @@ -7796,5 +7790,5 @@

    - +
    Description:

    Creates a lisp process (thread) via @@ -7809,5 +7803,5 @@

    - +
    See Also:
    make-process, process-preset, process-enable @@ -7830,5 +7824,5 @@
    - +
    Arguments and Values:

    process---a lisp process (thread).

    @@ -7843,5 +7837,5 @@
    - +
    Description:

    Arranges for process @@ -7874,5 +7868,5 @@

    - +
    See Also:
    @@ -7883,5 +7877,5 @@
    - +
    Notes:

    It would probably be better for result @@ -7913,10 +7907,10 @@

    - +
    Value Type:

    A lisp process (thread).

    - +
    Initial Value:

    Bound separately in each process, to that process itself. @@ -7924,5 +7918,5 @@

    - +
    Description:

    Used when lisp code needs to find out what process it is @@ -7930,5 +7924,5 @@

    - +
    See Also:
    @@ -7954,5 +7948,5 @@
    - +
    Arguments and Values:

    process---a lisp process (thread).

    @@ -7961,5 +7955,5 @@
    - +
    Description:

    Causes process to cleanly exit @@ -7988,5 +7982,5 @@

    - +
    See Also:
    process-kill, process-abort @@ -8008,5 +8002,5 @@
    - +
    Arguments and Values:

    process---a lisp process (thread).

    @@ -8014,5 +8008,5 @@
    - +
    Description:

    Entirely equivalent to calling @@ -8021,5 +8015,5 @@

    - +
    See Also:
    process-reset, process-abort @@ -8043,5 +8037,5 @@
    - +
    Arguments and Values:

    process---a lisp process (thread).

    @@ -8049,5 +8043,5 @@
    - +
    Description:

    Entirely equivalent to calling @@ -8063,5 +8057,5 @@

    - +
    See Also:
    process-reset, process-kill @@ -8082,10 +8076,10 @@
    - +
    Value Type:

    A positive integer.

    - +
    Initial Value:

    The clock resolution of the OS scheduler. Currently, @@ -8094,5 +8088,5 @@

    - +
    Description:

    This value is ordinarily of marginal interest at best, @@ -8102,5 +8096,5 @@

    - +
    See Also:
    @@ -8126,5 +8120,5 @@
    - +
    Description:

    This information is primarily for the benefit of @@ -8140,10 +8134,10 @@

    - +
    See Also:
    process-wait, process-wait-with-timeout, with-terminal-input
    - +
    Notes:

    This should arguably be SETFable, but doesn't seem to @@ -8169,5 +8163,5 @@

    - +
    Description:

    Advises the OS scheduler that the current thread has nothing @@ -8178,10 +8172,10 @@

    - +
    See Also:
    make-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input
    - +
    Notes:

    This is a holdover from the days of cooperative @@ -8206,5 +8200,5 @@

    - +
    Arguments and Values:

    whostate---a string, which will be the value of @@ -8219,5 +8213,5 @@

    - +
    Description:

    Causes the current lisp process (thread) to repeatedly @@ -8236,5 +8230,5 @@

    - +
    See Also:
    process-whostate, process-wait-with-timeout, make-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input @@ -8256,5 +8250,5 @@
    - +
    Arguments and Values:

    whostate---a string, which will be the value of @@ -8274,5 +8268,5 @@

    - +
    Description:

    If ticks is NIL, behaves exactly like @@ -8291,5 +8285,5 @@

    - +
    See Also:
    *ticks-per-second*, process-whostate, process-wait, make-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input @@ -8311,5 +8305,5 @@
    - +
    Arguments and Values:

    body---an implicit progn.

    @@ -8318,5 +8312,5 @@
    - +
    Description:

    Executes body @@ -8333,5 +8327,5 @@

    - +
    See Also:
    @@ -8357,5 +8351,5 @@
    - +
    Arguments and Values:

    name---any lisp object; saved as part of @@ -8367,5 +8361,5 @@

    - +
    Description:

    Creates and returns a lock object, which can @@ -8377,5 +8371,5 @@

    - +
    See Also:
    with-lock-grabbed, grab-lock, release-lock, try-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input @@ -8397,5 +8391,5 @@
    - +
    Arguments and Values:

    lock---an object of type CCL:LOCK.

    @@ -8405,5 +8399,5 @@
    - +
    Description:

    Waits until lock is either free or @@ -8416,5 +8410,5 @@

    - +
    See Also:
    make-lock, grab-lock, release-lock, try-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input @@ -8435,10 +8429,10 @@
    - +
    Arguments and Values:

    lock---an object of type CCL:LOCK.

    - +
    Description:

    Blocks until lock is owned by the @@ -8451,5 +8445,5 @@

    - +
    See Also:
    make-lock, with-lock-grabbed, release-lock, try-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input @@ -8469,10 +8463,10 @@
    - +
    Arguments and Values:

    lock---an object of type CCL:LOCK.

    - +
    Description:

    Signals an error of type CCL:LOCK-NOT-OWNER if @@ -8487,5 +8481,5 @@

    - +
    See Also:
    make-lock, with-lock-grabbed, grab-lock, try-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input @@ -8506,5 +8500,5 @@
    - +
    Arguments and Values:

    lock---an object of type CCL:LOCK.

    @@ -8513,5 +8507,5 @@
    - +
    Description:

    Tests whether lock @@ -8526,5 +8520,5 @@

    - +
    See Also:
    make-lock, with-lock-grabbed, grab-lock, release-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input @@ -8546,5 +8540,5 @@
    - +
    Arguments and Values:

    read-write-lock---a newly-allocated object of type @@ -8552,5 +8546,5 @@

    - +
    Description:

    Creates and returns an object of type CCL::READ-WRITE-LOCK. @@ -8563,10 +8557,10 @@

    - +
    See Also:
    with-read-lock, with-write-lock, make-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input
    - +
    Notes:

    There probably should be some way to @@ -8591,5 +8585,5 @@

    - +
    Arguments and Values:

    read-write-lock---an object of type @@ -8600,5 +8594,5 @@

    - +
    Description:

    Waits until read-write-lock has no @@ -8614,5 +8608,5 @@

    - +
    See Also:
    make-read-write-lock, with-write-lock, make-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input @@ -8634,5 +8628,5 @@
    - +
    Arguments and Values:

    read-write-lock---an object of type @@ -8643,5 +8637,5 @@

    - +
    Description:

    Waits until read-write-lock has no @@ -8658,5 +8652,5 @@

    - +
    See Also:
    make-read-write-lock, with-read-lock, make-lock, make-semaphore, process-input-wait, process-output-wait, with-terminal-input @@ -8678,10 +8672,10 @@
    - +
    Arguments and Values:

    semaphore---a newly-allocated object of type CCL:SEMAPHORE.

    - +
    Description:

    Creates and returns an object of type CCL:SEMAPHORE. @@ -8692,5 +8686,5 @@

    - +
    See Also:
    signal-semaphore, wait-on-semaphore, timed-wait-on-semaphore, make-lock, make-read-write-lock, process-input-wait, process-output-wait, with-terminal-input @@ -8712,5 +8706,5 @@
    - +
    Arguments and Values:

    semaphore---an object of type CCL:SEMAPHORE.

    @@ -8719,5 +8713,5 @@
    - +
    Description:

    Atomically increments semaphore's @@ -8726,10 +8720,10 @@

    - +
    See Also:
    make-semaphore, wait-on-semaphore, timed-wait-on-semaphore, make-lock, make-read-write-lock, process-input-wait, process-output-wait, with-terminal-input
    - +
    Notes:

    result should probably be interpreted @@ -8754,5 +8748,5 @@

    - +
    Arguments and Values:

    semaphore---an object of type CCL:SEMAPHORE.

    @@ -8761,5 +8755,5 @@
    - +
    Description:

    Waits until semaphore @@ -8769,10 +8763,10 @@

    - +
    See Also:
    make-semaphore, signal-semaphore, timed-wait-on-semaphore, make-lock, make-read-write-lock, process-input-wait, process-output-wait, with-terminal-input
    - +
    Notes:

    result should probably be interpreted @@ -8798,5 +8792,5 @@

    - +
    Arguments and Values:

    semaphore---An object of type CCL:SEMAPHORE.

    @@ -8811,5 +8805,5 @@
    - +
    Description:

    Waits until semaphore @@ -8820,5 +8814,5 @@

    - +
    See Also:
    make-semaphore, wait-on-semaphore, make-lock, make-read-write-lock, process-input-wait, process-output-wait, with-terminal-input @@ -8840,5 +8834,5 @@
    - +
    Arguments and Values:

    fd---a file descriptor, which is a non-negative integer @@ -8848,5 +8842,5 @@

    - +
    Description:

    Wait until input is available on fd. @@ -8864,10 +8858,10 @@

    - +
    See Also:
    make-lock, make-read-write-lock, make-semaphore, process-output-wait, with-terminal-input
    - +
    Notes:

    @@ -8894,5 +8888,5 @@

    - +
    Arguments and Values:

    fd---a file descriptor, which is a non-negative integer @@ -8902,5 +8896,5 @@

    - +
    Description:

    Wait until output is possible on fd or until timeout, if @@ -8915,10 +8909,10 @@

    - +
    See Also:
    make-lock, make-read-write-lock, make-semaphore, process-input-wait, with-terminal-input
    - +
    Notes:

    @@ -8945,5 +8939,5 @@

    - +
    Arguments and Values:

    body---an implicit progn.

    @@ -8952,5 +8946,5 @@
    - +
    Description:

    Requests exclusive read access to the standard terminal @@ -8960,5 +8954,5 @@

    - +
    See Also:
    *request-terminal-input-via-break*, :y, make-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait @@ -8979,15 +8973,15 @@
    - +
    Value Type:

    A boolean.

    - +
    Initial Value:

    NIL.

    - +
    Description:

    Controls how attempts to obtain ownership of terminal input @@ -9001,5 +8995,5 @@

    - +
    See Also:
    with-terminal-input, :y, make-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait @@ -9020,5 +9014,5 @@
    - +
    Arguments and Values:

    p---a lisp process (thread), designated either by @@ -9029,5 +9023,5 @@

    - +
    Description:

    :Y is a toplevel command, not a function. As such, it @@ -9040,5 +9034,5 @@

    - +
    See Also:
    with-terminal-input, *request-terminal-input-via-break*, make-lock, make-read-write-lock, make-semaphore, process-input-wait, process-output-wait @@ -9061,5 +9055,5 @@
    - +
    Arguments and Values:

    process---a process, typically created by process-run-function or by make-process

    @@ -9071,5 +9065,5 @@
    - +
    Description:

    Waits for the specified process to terminate. If the @@ -9212,5 +9206,5 @@

    - +
    Arguments and Values:

    address-family---The address/protocol family of this socket. Currently @@ -9311,5 +9305,5 @@

    - +
    Description:

    Creates and returns a new socket

    @@ -9330,5 +9324,5 @@
    - +
    Arguments and Values:

    socket---The listener-socket to listen on.

    @@ -9338,5 +9332,5 @@
    - +
    Description:

    Extracts the first connection on the queue of pending @@ -9364,5 +9358,5 @@

    - +
    Arguments and Values:

    dotted---A string representing an IP address in the @@ -9372,5 +9366,5 @@

    - +
    Description:

    Converts a dotted-string representation of a host address to @@ -9392,5 +9386,5 @@

    - +
    Arguments and Values:

    ipaddr---A 32-bit integer representing an internet host address

    @@ -9401,5 +9395,5 @@
    - +
    Description:

    Converts a 32-bit unsigned IP address into octets.

    @@ -9420,5 +9414,5 @@
    - +
    Arguments and Values:

    ipaddr---a 32-bit integer representing an internet host address

    @@ -9427,5 +9421,5 @@
    - +
    Description:

    Converts a 32-bit unsigned IP address into a host name @@ -9447,5 +9441,5 @@

    - +
    Arguments and Values:

    host---Specifies the host. It can be either a host name @@ -9455,5 +9449,5 @@

    - +
    Description:

    Converts a host spec in any of the acceptable formats into a @@ -9475,5 +9469,5 @@

    - +
    Arguments and Values:

    port---Specifies the port. It can be either a string, such as @@ -9484,5 +9478,5 @@

    - +
    Description:

    Finds the port number for the specified port and protocol

    @@ -9504,5 +9498,5 @@
    - +
    Arguments and Values:

    socket---The socket to read from

    @@ -9521,5 +9515,5 @@
    - +
    Description:

    Reads a UDP packet from a socket. If no packets are @@ -9558,5 +9552,5 @@

    - +
    Arguments and Values:

    socket---The socket to write to

    @@ -9574,5 +9568,5 @@
    - +
    Description:

    Send a UDP packet over a socket.

    @@ -9593,5 +9587,5 @@
    - +
    Arguments and Values:

    socket---The socket to shut down (typically a tcp-stream)

    @@ -9600,5 +9594,5 @@
    - +
    Description:

    Shuts down part of a bidirectional connection. This is @@ -9621,10 +9615,10 @@

    - +
    Arguments and Values:

    socket---The socket

    - +
    Description:

    Returns the native OS's representation of the socket, or @@ -9651,10 +9645,10 @@

    - +
    Arguments and Values:

    socket---The socket

    - +
    Description:

    Returns the 32-bit unsigned IP address of the remote host, @@ -9676,10 +9670,10 @@

    - +
    Arguments and Values:

    socket---The socket

    - +
    Description:

    Returns the remote port number, or NIL if the socket is not @@ -9701,10 +9695,10 @@

    - +
    Arguments and Values:

    socket---The socket

    - +
    Description:

    Returns 32-bit unsigned IP address of the local host.

    @@ -9725,10 +9719,10 @@
    - +
    Arguments and Values:

    socket---The socket

    - +
    Description:

    Returns the local port number

    @@ -9749,10 +9743,10 @@
    - +
    Arguments and Values:

    socket---The socket

    - +
    Description:

    Returns :internet or :file, as appropriate.

    @@ -9773,10 +9767,10 @@
    - +
    Arguments and Values:

    socket---The socket

    - +
    Description:

    Returns :active for tcp-stream, :passive for @@ -9798,10 +9792,10 @@

    - +
    Arguments and Values:

    socket---The socket

    - +
    Description:

    Returns the socket format as specified by the :format @@ -9823,10 +9817,10 @@

    - +
    Arguments and Values:

    socket---The socket

    - +
    Description:

    returns :stream for tcp-stream and listener-socket, and @@ -9847,10 +9841,10 @@

    - +
    Description:

    The class of OS errors signaled by socket functions

    - +
    Superclasses:

    simple-error

    @@ -9871,10 +9865,10 @@
    - +
    Arguments and Values:

    socket-error---the condition

    - +
    Description:

    The OS error code of the error

    @@ -9895,10 +9889,10 @@
    - +
    Arguments and Values:

    socket-error---the condition

    - +
    Description:

    A symbol representing the error code in a more @@ -9924,10 +9918,10 @@

    - +
    Arguments and Values:

    socket-error---the condition

    - +
    Description:

    A string describing the context where the error happened. On @@ -9950,5 +9944,5 @@

    - +
    Arguments and Values:

    socket---The socket to close

    @@ -9961,5 +9955,5 @@
    - +
    Description:

    The close generic function can be applied to sockets. It @@ -9982,5 +9976,5 @@

    - +
    Arguments and Values:

    var---variable to bind

    @@ -9989,5 +9983,5 @@
    - +
    Description:

    executes body with var bound to the result of applying @@ -10121,5 +10115,5 @@

    - +
    Arguments and Values:

    program---A string or pathname which denotes an executable file. @@ -10172,5 +10166,5 @@

    - +
    Description:

    Runs the specified program in an external (Unix) process, @@ -10192,5 +10186,5 @@

    - +
    Arguments and Values:

    proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM.

    @@ -10198,5 +10192,5 @@
    - +
    Description:

    Sends the specified "signal" to the specified @@ -10221,10 +10215,10 @@

    - +
    Arguments and Values:

    proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM.

    - +
    Description:

    Returns the process id assigned to @@ -10248,10 +10242,10 @@

    - +
    Arguments and Values:

    proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM.

    - +
    Description:

    Returns the stream created when the input argument to @@ -10274,10 +10268,10 @@

    - +
    Arguments and Values:

    proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM.

    - +
    Description:

    Returns the stream created when the output argument to @@ -10301,10 +10295,10 @@

    - +
    Arguments and Values:

    proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM.

    - +
    Description:

    Returns the stream created when the error argument to @@ -10328,10 +10322,10 @@

    - +
    Arguments and Values:

    proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM.

    - +
    Description:

    Returns, as multiple values, a keyword denoting the status @@ -10363,5 +10357,5 @@

    - 9.1.1. Stream External Encoding + 9.1.1. Stream External Encoding
    @@ -10431,5 +10425,5 @@
    -

    9.1.1. Stream External Encoding

    +

    9.1.1. Stream External Encoding

    @@ -10592,10 +10586,10 @@
    - - - - - - + + + + + +

    A stream that is associated with a file descriptor has attributes and accessors: @@ -10650,5 +10644,5 @@

    - +
    Values:

    stream-list---A list of open file streams. This is a copy of @@ -10657,10 +10651,10 @@

    - +
    Description:

    Returns a list of open file streams.

    - +
    See Also:
    note-open-file-stream, remove-open-file-stream @@ -10685,10 +10679,10 @@
    - +
    Arguments:

    file-stream---A file stream.

    - +
    Description:

    Adds a file stream to the internal list of open @@ -10699,5 +10693,5 @@

    - +
    See Also:
    open-file-streams, remove-open-file-stream @@ -10722,10 +10716,10 @@
    - +
    Arguments:

    file-stream---A file stream.

    - +
    Description:

    Remove file stream from the internal list of open file @@ -10736,5 +10730,5 @@

    - +
    See Also:
    open-file-streams, note-open-file-stream @@ -11169,5 +11163,5 @@
    - +
    Arguments and Values:

    stream---a stream, presumably a fundamental-input-stream.

    @@ -11180,5 +11174,5 @@
    - +
    Description:

    Should try to read up to count elements from stream into the @@ -11201,5 +11195,5 @@

    - +
    Arguments and Values:

    stream---a stream, presumably a fundamental-output-stream.

    @@ -11212,5 +11206,5 @@
    - +
    Description:

    should try to write the first count elements of list to @@ -11232,5 +11226,5 @@

    - +
    Arguments and Values:

    stream---a stream, presumably a fundamental-input-stream

    @@ -11248,5 +11242,5 @@
    - +
    Description:

    should try to read successive elements from stream into @@ -11271,5 +11265,5 @@

    - +
    Arguments and Values:

    stream---a stream, presumably a fundamental-output-stream

    @@ -11287,5 +11281,5 @@
    - +
    Description:

    should try to write successive elements of vector to stream, @@ -11309,5 +11303,5 @@

    - +
    Method Signatures:
    ccl::stream-device @@ -11315,5 +11309,5 @@
    - +
    Arguments and Values:

    s---a stream.

    @@ -11326,5 +11320,5 @@
    - +
    Description:

    Returns the file descriptor associated with @@ -11350,5 +11344,5 @@

    - +
    Description:

    Reads up to max-octets octets from stream into ivector, @@ -11357,5 +11351,5 @@

    - +
    Arguments:

    stream---An input stream. The method defined on @@ -11382,5 +11376,5 @@

    - +
    Description:

    Writes max-octets octets to stream from ivector, starting at @@ -11388,5 +11382,5 @@

    - +
    Arguments:

    stream---An input stream. The method defined on @@ -11398,5 +11392,5 @@

    - +
    Examples:
    @@ -12564,5 +12558,5 @@

    - + CHUD:*SHARK-CONFIG-FILE* [Variable]

    @@ -12570,5 +12564,5 @@ configuration file created by the "Config Editor" in Shark.app.

    - + CHUD:METER form &key (reset nil) (debug-output nil) [Macro]

    @@ -12832,5 +12826,5 @@
    - 12.12. The Foreign-Function-Interface Dictionary + 12.12. The Foreign-Function-Interface Dictionary
    @@ -13660,5 +13654,5 @@
    -

    12.3.2.4. %int-to-ptr [Function]

    +

    12.3.2.4. %int-to-ptr [Function]

    @@ -13701,5 +13695,5 @@
    -

    12.3.2.5. %inc-ptr [Function]

    +

    12.3.2.5. %inc-ptr [Function]

    @@ -13751,5 +13745,5 @@
    -

    12.3.2.6. %ptr-to-int [Function]

    +

    12.3.2.6. %ptr-to-int [Function]

    @@ -13793,5 +13787,5 @@
    -

    12.3.2.7. %null-ptr [Macro]

    +

    12.3.2.7. %null-ptr [Macro]

    @@ -13818,5 +13812,5 @@
    -

    12.3.2.8. %null-ptr-p [Function]

    +

    12.3.2.8. %null-ptr-p [Function]

    @@ -13860,5 +13854,5 @@
    -

    12.3.2.9. %setf-macptr [Function]

    +

    12.3.2.9. %setf-macptr [Function]

    @@ -13908,5 +13902,5 @@
    -

    12.3.2.10. %incf-ptr [Macro]

    +

    12.3.2.10. %incf-ptr [Macro]

    @@ -13956,5 +13950,5 @@
    -

    12.3.2.11. with-macptrs [Macro]

    +

    12.3.2.11. with-macptrs [Macro]

    @@ -14006,5 +14000,5 @@
    -

    12.3.2.12. %stack-block [Macro]

    +

    12.3.2.12. %stack-block [Macro]

    @@ -14057,5 +14051,5 @@
    -

    12.3.2.13. make-cstring [Function]

    +

    12.3.2.13. make-cstring [Function]

    @@ -14100,5 +14094,5 @@
    -

    12.3.2.14. with-cstrs [Macro]

    +

    12.3.2.14. with-cstrs [Macro]

    @@ -14150,5 +14144,5 @@
    -

    12.3.2.15. with-encoded-cstrs [Macro]

    +

    12.3.2.15. with-encoded-cstrs [Macro]

    @@ -14213,5 +14207,5 @@
    -

    12.3.2.16. %get-cstring [Function]

    +

    12.3.2.16. %get-cstring [Function]

    @@ -14255,5 +14249,5 @@
    -

    12.3.2.17. %str-from-ptr [Function]

    +

    12.3.2.17. %str-from-ptr [Function]

    @@ -15685,5 +15679,5 @@
    -

    12.12. The Foreign-Function-Interface Dictionary

    +

    12.12. The Foreign-Function-Interface Dictionary

    @@ -15702,5 +15696,5 @@
    - +
    Description:

    Reads a symbol from the current input stream, with *PACKAGE* @@ -15754,5 +15748,5 @@

    - +
    Description:

    In CCL 1.2 and later, the #& reader macro can be used to @@ -15813,5 +15807,5 @@

    - +
    Description:

    In CCL 0.14.2 and later, the #? reader macro can be used @@ -15860,5 +15854,5 @@

    - +
    Description:

    In CCL 1.2 and later, the #/ reader macro can be used to @@ -15963,5 +15957,5 @@

    - +
    Description:

    In CCL 1.2 and later, the #> reader macro reads @@ -15992,5 +15986,5 @@

    - +
    Values:

    library---either an object of type SHLIB, or a string which @@ -15999,5 +15993,5 @@

    - +
    Description:

    If completely is T, sets the @@ -16028,5 +16022,5 @@

    - +
    Values:

    name---A symbol which can be made into a special variable

    @@ -16045,5 +16039,5 @@
    - +
    Description:

    Proclaims name @@ -16081,5 +16075,5 @@

    - +
    Values:

    name---NIL or a keyword; the keyword may contain @@ -16089,5 +16083,5 @@

    - +
    Description:

    If name is non-NIL, defines name to be an alias for the @@ -16123,5 +16117,5 @@

    - +
    Values:

    name--- @@ -16136,5 +16130,5 @@

    - +
    Description:

    If there is already an EXTERNAL-ENTRY-POINT for @@ -16164,5 +16158,5 @@

    - +
    Values:

    name---A lisp string. See external, above.

    @@ -16177,5 +16171,5 @@
    - +
    Description:

    Calls the foreign function at the address obtained by @@ -16204,5 +16198,5 @@

    - +
    Values:

    entrypoint---A fixnum or MACPTR

    @@ -16215,5 +16209,5 @@
    - +
    Description:

    Calls the foreign function at address entrypoint passing the @@ -16241,5 +16235,5 @@

    - +
    Values:

    entrypoint---A fixnum or MACPTR

    @@ -16254,5 +16248,5 @@
    - +
    Description:

    Calls the foreign function at address entrypoint passing the @@ -16279,10 +16273,10 @@

    - +
    Values:

    name---A lisp string.

    - +
    Description:

    Tries to resolve the address of the foreign symbol @@ -16307,10 +16301,10 @@

    - +
    Values:

    name---A lisp string.

    - +
    Description:

    Tries to resolve the address of the foreign symbol name. If @@ -16334,5 +16328,5 @@

    - +
    Values:

    ptr---A MACPTR that points to a block of @@ -16340,5 +16334,5 @@

    - +
    Description:

    In CCL 1.2 and later, the CCL:FREE @@ -16372,5 +16366,5 @@

    - +
    Values:

    element-count---A positive integer.

    @@ -16387,5 +16381,5 @@
    - +
    Description:

    @@ -16422,5 +16416,5 @@

    - +
    Values:

    typespec---A foreign type specifier, or a keyword which is used @@ -16439,5 +16433,5 @@

    - +
    Description:

    @@ -16488,5 +16482,5 @@

    - +
    Values:

    typespec---A foreign type specifier, or a keyword which is used @@ -16502,5 +16496,5 @@

    - +
    Description:

    @@ -16543,5 +16537,5 @@

    - +
    Notes:

    @@ -16576,5 +16570,5 @@

    - +
    Values:

    name---A SIMPLE-STRING which is presumed to be the so-name of @@ -16584,5 +16578,5 @@

    - +
    Description:

    If the library denoted by name can @@ -16595,5 +16589,5 @@

    - +
    Examples:
    ;;; Try to do something simple.
@@ -16630,5 +16624,5 @@
    - +
    Notes:

    It would be helpful to describe what an soname is and give @@ -16653,5 +16647,5 @@

    - +
    Values:

    ptr---a MACPTR.

    @@ -16661,5 +16655,5 @@
    - +
    Description:

    References an instance of a foreign type (or a component of @@ -16687,5 +16681,5 @@

    - +
    Values:

    eep---An EXTERNAL-ENTRY-POINT, as obtained by the EXTERNAL @@ -16693,5 +16687,5 @@

    - +
    Description:

    Tries to resolve the address of the EXTERNAL-ENTRY-POINT @@ -16716,5 +16710,5 @@

    - +
    Values:

    var---A symbol (a lisp variable)

    @@ -16724,5 +16718,5 @@
    - +
    Description:

    Executes body @@ -16754,5 +16748,5 @@

    - +
    Values:

    var---A symbol (a lisp variable)

    @@ -16761,5 +16755,5 @@
    - +
    Description:

    Executes body in an environment in which each var is @@ -16788,5 +16782,5 @@

    - +
    Values:

    object---A CLOS object of a class for which there exists @@ -16796,5 +16790,5 @@

    - +
    Description:

    @@ -16833,5 +16827,5 @@

    - +
    Example:
    @@ -16847,5 +16841,5 @@
    - +
    See Also:
    @@ -16869,5 +16863,5 @@
    - +
    Values:

    dir-id---A keyword whose pname, mapped to lower case, names a @@ -16876,5 +16870,5 @@

    - +
    Description:

    Tells CCL to remove the interface directory denoted by @@ -16900,5 +16894,5 @@

    - +
    Values:

    dir-id---A keyword whose pname, mapped to lower case, names a @@ -16907,5 +16901,5 @@

    - +
    Description:

    Tells CCL to add the interface directory denoted by @@ -16929,5 +16923,5 @@

    - +
    Examples:

    One typically wants interface information to be @@ -17032,10 +17026,10 @@

    - 13.6.1. Using define-objc-method + 13.6.1. Using define-objc-method
    - 13.6.2. Using objc:defmethod + 13.6.2. Using objc:defmethod
    @@ -17643,5 +17637,5 @@
    -

    13.6.1. Using define-objc-method

    +

    13.6.1. Using define-objc-method

    @@ -17760,5 +17754,5 @@
    -

    13.6.2. Using objc:defmethod

    +

    13.6.2. Using objc:defmethod

    @@ -18584,5 +18578,5 @@
    - +
    Arguments and Values:

    name---a string which is the name of an existing @@ -18594,5 +18588,5 @@

    - +
    Description:

    @@ -18615,5 +18609,5 @@

    - +
    Arguments and Values:

    name---a string which is the name of a new or existing @@ -18628,5 +18622,5 @@

    - +
    Description:

    @@ -18652,5 +18646,5 @@

    - +
    Values:

    path---a string, an absolute pathname in Posix format - with @@ -18658,5 +18652,5 @@

    - +
    Description:

    @@ -18680,5 +18674,5 @@

    - +
    Values:

    uid---a non-negative integer, identifying a specific user @@ -18686,5 +18680,5 @@

    - +
    Description:

    @@ -18706,5 +18700,5 @@

    - +
    Arguments and Values:

    uid---a non-negative integer, identifying a specific user @@ -18715,5 +18709,5 @@

    - +
    Description:

    @@ -18738,5 +18732,5 @@

    - +
    Arguments and Values:

    gid---a non-negative integer, identifying a specific @@ -18747,5 +18741,5 @@

    - +
    Description:

    @@ -18770,10 +18764,10 @@

    - +
    Values:

    pid---a non-negative integer, identifying an OS process

    - +
    Description:

    @@ -18796,5 +18790,5 @@

    - +
    Values:

    uid---a non-negative integer, identifying a specific user @@ -18804,5 +18798,5 @@

    - +
    Description:

    @@ -18829,5 +18823,5 @@

    - +
    Values:

    command-line---a string, obeying all the whitespace and @@ -18838,5 +18832,5 @@

    - +
    Description:

    @@ -18854,5 +18848,5 @@

    - +
    Notes:

    @@ -18879,5 +18873,5 @@

    - +
    Arguments and Values:

    class-name---a string which denotes an existing class name, or a @@ -18886,5 +18880,5 @@

    - +
    Description:

    Used to refer to a known ObjC class by name. (Via the use @@ -18911,5 +18905,5 @@

    - +
    Arguments and Values:

    string---a string constant, used to canonically refer to an @@ -18917,5 +18911,5 @@

    - +
    Description:

    Used to refer to an ObjC method selector (method name). Uses @@ -18939,5 +18933,5 @@

    - +
    Arguments and Values:

    name-and-result-type---either an Objective-C message name, for methods @@ -18961,5 +18955,5 @@

    - +
    Description:

    Defines an Objective-C-callable method which implements @@ -18986,5 +18980,5 @@

    - +
    Arguments and Values:

    selector---either a string which represents the name of the @@ -19001,5 +18995,5 @@

    - +
    Description:

    Defines an ObjC-callable method which implements the @@ -19022,10 +19016,10 @@

    - +
    Arguments and Values:

    As per DEFINE-OBJC-METHOD

    - +
    Description:

    Like DEFINE-OBJC-METHOD, only used to define methods on the @@ -19069,5 +19063,5 @@

    - +
    Description:

    This variable is currently only used by the standard reader macro @@ -19104,5 +19098,5 @@

    - +
    Description:

    Per ANSI CL, Clozure CL supports the :EXTERNAL-FORMAT keyword @@ -19148,5 +19142,5 @@

    - +
    Description:

    The value of this variable is used when :EXTERNAL-FORMAT is @@ -19172,10 +19166,10 @@

    - +
    Superclasses:

    NS:NS-STRING

    - +
    Initargs:

    :string--- @@ -19185,5 +19179,5 @@

    - +
    Description:

    @@ -19203,5 +19197,5 @@

    - +
    Examples:

    @@ -19234,5 +19228,5 @@

    - +
    Notes:

    @@ -19574,5 +19568,5 @@

    - +
    Arguments and Values:

    type---The type of population, one of :LIST (the default) or :ALIST

    @@ -19582,5 +19576,5 @@
    - +
    Description:

    Creates a new population of the specified type.

    @@ -19600,5 +19594,5 @@
    - +
    Description:

    returns the type of population, one of :LIST or :ALIST

    @@ -19618,5 +19612,5 @@
    - +
    Description:

    returns the list encapsulated in population. @@ -19641,5 +19635,5 @@

    - +
    Description:

    Sets the list encapsulated in population to @@ -19674,5 +19668,5 @@

    - +
    Description:

    Returns the value of the kernel variable that specifies the @@ -19695,10 +19689,10 @@

    - +
    Arguments and Values:

    new-threshold---The requested new lisp-heap-gc-threshold.

    - +
    Description:

    Sets the value of the kernel variable that specifies the @@ -19724,5 +19718,5 @@

    - +
    Description:

    Tries to grow or shrink lisp's heap space, so that the @@ -19744,10 +19738,10 @@

    - +
    Arguments and Values:

    arg---a generalized boolean

    - +
    Description:

    Enables the EGC if arg is non-nil, disables the EGC @@ -19775,5 +19769,5 @@

    - +
    Description:

    Returns T if the EGC was enabled at the time of the call, @@ -19798,5 +19792,5 @@

    - +
    Description:

    Returns T if the EGC was active at the time of the call, NIL @@ -19823,5 +19817,5 @@

    - +
    Description:

    Returns, as multiple values, the sizes in kilobytes of the @@ -19845,5 +19839,5 @@

    - +
    Arguments and Values:

    generation-0-size---the requested threshold size of the youngest @@ -19855,5 +19849,5 @@

    - +
    Description:

    Puts the indicated threshold sizes in effect. @@ -19879,10 +19873,10 @@

    - +
    Arguments and Values:

    arg---a generalized boolean

    - +
    Description:

    Tries to influence the GC to retain/recycle the pages @@ -19909,5 +19903,5 @@

    - +
    Description:

    Returns T if the GC tries to retain pages between full GCs @@ -20064,5 +20058,5 @@

    - 16.7.2. Recommended Reading + 16.7.2. Recommended Reading
    @@ -21340,5 +21334,5 @@

  • To support a feature called GCTWA - [1] + [1] , the vector that contains the internal symbols of the current package is marked on entry to the @@ -21473,5 +21467,5 @@

    -

    [1] I believe that the acronym comes from MACLISP, +

    [1] I believe that the acronym comes from MACLISP, where it stood for "Garbage Collection of Truly Worthless Atoms".

    @@ -21533,5 +21527,5 @@ generations looking for such intergenerational references, the runtime system must note all such intergenerational references - at the point where they're created (via Setf).[2] The + at the point where they're created (via Setf).[2] The set of pointers that may contain intergenerational references is sometimes called the remembered set.

    @@ -21580,5 +21574,5 @@ that might introduce an intergenerational reference must be memoized. - [3] It's always safe to + [3] It's always safe to push any cons cell or gvector locative onto the memo stack; it's never safe to push anything else. @@ -21601,5 +21595,5 @@
    -

    [2] This is +

    [2] This is sometimes called "The Write Barrier": all assignments which might result in intergenerational references must be noted, as @@ -21607,5 +21601,5 @@

    -

    [3] Note that the implicit setfs that occur when +

    [3] Note that the implicit setfs that occur when initializing an object - as in the case of a call to cons or vector - can't introduce intergenerational references, since @@ -21723,5 +21717,5 @@

    -

    16.7.2. Recommended Reading

    +

    16.7.2. Recommended Reading

    @@ -22136,5 +22130,5 @@
    - +
    Description:

    When true, attempts to redefine (via DEFUN or DEFMETHOD) @@ -22161,5 +22155,5 @@

    - +
    Description:

    Arranges that the outermost special bindings of *PACKAGE* @@ -22185,5 +22179,5 @@

    - +
    Description:

    Arranges that the outermost special bindings of *PACKAGE* @@ -22208,5 +22202,5 @@

    - +
    Description:

    This variable is initialized each time an Clozure CL session @@ -22233,5 +22227,5 @@

    - +
    Description:

    Returns non-NIL if AltiVec is available.

    @@ -22251,5 +22245,5 @@
    - +
    Description:

    Intended to control the expansion of certain lap macros. @@ -22273,5 +22267,5 @@

    - +
    Arguments and Values:

    reglist---A list of vector register names (vr0 .. vr31).

    @@ -22279,5 +22273,5 @@
    - +
    Description:

    Specifies the set of AltiVec registers used in body. If @@ -22305,5 +22299,5 @@

    - +
    Arguments and Values:

    base---Any available general-purpose register.

    @@ -22314,5 +22308,5 @@
    - +
    Description:

    Generates code which allocates a 16-byte aligned buffer @@ -22979,5 +22973,5 @@ Symbol Index

    -

    This document was last modified at 19:42 on December 10, 2009, in UTC.

    It uses version 1.73.2 of the Norman Walsh Docbook stylesheets.

    Built from subversion rev 13291

    Using libxml 20631, libxslt 10122 and libexslt 813.

    +

    This document was last modified at 0:0 on March 25, 2010, in UTC.

    It uses version 1.73.2 of the Norman Walsh Docbook stylesheets.

    Built from subversion rev 13554

    Using libxml 20631, libxslt 10122 and libexslt 813.