- + CCL:*TRACE-LEVEL* [Variable]
Variable bound to the current nesting level during execution of before and after trace actions. The default printing actions use it to determine the amount of indentation.
- + CCL:*TRACE-MAX-INDENT* [Variable]
The default before and after print actions will not indent by more than the value of ccl:*trace-max-indent* regardless of the current trace level.
-
+
CCL:TRACE-FUNCTION spec &key {keyword value}* [Function]
- + CCL:*TRACE-PRINT-LEVEL* [Variable]
@@ -3310,5 +3320,5 @@ explicit printing done by user code.- + CCL:*TRACE-PRINT-LENGTH* [Variable]
@@ -3318,5 +3328,5 @@ explicit printing done by user code.- + CCL:*TRACE-BAR-FREQUENCY* [Variable]
@@ -3442,5 +3452,5 @@domain---This is used to indicate where the external @@ -3476,5 +3486,5 @@
Despite the function's name, it doesn't necessarily create a @@ -3644,5 +3654,5 @@
@@ -3660,5 +3670,5 @@ @@ -3688,5 +3698,5 @@ @@ -3710,5 +3720,5 @@@@ -4206,5 +4216,5 @@
@@ -4249,5 +4259,5 @@
@@ -4295,5 +4305,5 @@
Clozure CL sets up logical pathname translations for logical hosts: ccl and home
The CCL logical host should point to the
ccl directory. It is used for a variety of
@@ -4449,5 +4459,5 @@
platforms.
-
+
CCL:MAP-FILE-TO-IVECTOR
pathname
@@ -4509,5 +4519,5 @@
a memory error.
-
+
CCL:UNMAP-IVECTOR
displaced-array
@@ -4521,5 +4531,5 @@
target is an empty vector (of length zero).
-
+
CCL:MAP-FILE-TO-OCTET-VECTOR
pathname
@@ -4531,5 +4541,5 @@
bytes.
-
+
CCL:UNMAP-OCTET-VECTOR
displaced-array
@@ -4570,5 +4580,5 @@
static.
Clozure CL provides the
function CCL:SAVE-APPLICATION, which creates a file
@@ -4704,5 +4714,5 @@
converted, because address 0 can always be relied upon to refer to
the same thing.
As of Clozure CL 1.2, the constant CCL:+NULL-PTR+
refers to a MACPTR object that points to address 0.
opencml64 script.
+ Multiple fasl files can be concatenated into a single file. +
++
++
out-file--- + Name of the file in which to store the concatenation. +
+fasl-files--- + List of names of fasl files to concatenate. +
+:if-exists---
+ As for OPEN, defaults to
+ :error
+
+ Creates a fasl file which, when loaded, will have the same + effect as loading the individual input fasl files in the + specified order. The single file might be easier to + distribute or install, and loading it may be at least a little + faster than loading the individual files (since it avoids the + overhead of opening and closing each file in succession.) +
++ The PATHNAME-TYPE of the output file and of each input file + defaults to the current platform's fasl file type (.dx64fsl or + whatever.) If any of the input files has a different + type/extension an error will be signaled, but it doesn't + otherwise try too hard to verify that the input files are real + fasl files for the current platform. +
+@@ -4899,5 +4970,5 @@
@@ -4924,5 +4995,5 @@
@@ -4939,5 +5010,5 @@ @@ -4957,5 +5028,5 @@@@ -5113,5 +5184,5 @@
@@ -5131,5 +5202,5 @@@@ -5147,5 +5218,5 @@
@@ -5165,5 +5236,5 @@@@ -5206,5 +5277,5 @@
@@ -5239,5 +5310,5 @@ @@ -5251,5 +5322,5 @@ @@ -5278,5 +5349,5 @@ @@ -5326,5 +5397,5 @@ @@ -5355,5 +5426,5 @@ @@ -5363,5 +5434,5 @@ @@ -5399,5 +5470,5 @@ @@ -5452,5 +5523,5 @@ @@ -5495,5 +5566,5 @@@@ -5551,5 +5622,5 @@
@@ -5573,5 +5644,5 @@
@@ -5599,5 +5670,5 @@
@@ -5625,5 +5696,5 @@
@@ -5656,5 +5727,5 @@
@@ -5683,5 +5754,5 @@
@@ -5706,5 +5777,5 @@
@@ -5733,5 +5804,5 @@
@@ -5760,5 +5831,5 @@
@@ -5927,5 +5998,5 @@
@@ -5952,5 +6023,5 @@
@@ -6183,5 +6254,5 @@
@@ -6315,5 +6386,5 @@ the required subsystems, if necessary.
-
+
BUILD-APPLICATION &key
( process-suspend was previously called
@@ -7506,5 +7577,5 @@
@@ -7559,5 +7630,5 @@
It would be nice to have more discussion of what it means
@@ -7703,5 +7774,5 @@
It would probably be better for result
@@ -7842,10 +7913,10 @@
This should arguably be SETFable, but doesn't seem to
@@ -8098,5 +8169,5 @@
Advises the OS scheduler that the current thread has nothing
@@ -8107,10 +8178,10 @@
This is a holdover from the days of cooperative
@@ -8135,5 +8206,5 @@
Creates and returns an object of type CCL::READ-WRITE-LOCK.
@@ -8492,10 +8563,10 @@
There probably should be some way to
@@ -8520,5 +8591,5 @@
result should probably be interpreted
@@ -8683,5 +8754,5 @@
result should probably be interpreted
@@ -8727,5 +8798,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -8777,5 +8848,5 @@
@@ -8823,5 +8894,5 @@
fd---a file descriptor, which is a non-negative integer
@@ -8831,5 +8902,5 @@
@@ -8874,5 +8945,5 @@
process---a process, typically created by process-run-function or by make-process Waits for the specified process to terminate. If the
@@ -9141,5 +9212,5 @@
address-family---The address/protocol family of this socket. Currently
@@ -9240,5 +9311,5 @@
Creates and returns a new socket Extracts the first connection on the queue of pending
@@ -9293,5 +9364,5 @@
Converts a dotted-string representation of a host address to
@@ -9321,5 +9392,5 @@
ipaddr---A 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into octets. ipaddr---a 32-bit integer representing an internet host address Converts a 32-bit unsigned IP address into a host name
@@ -9376,5 +9447,5 @@
host---Specifies the host. It can be either a host name
@@ -9384,5 +9455,5 @@
Converts a host spec in any of the acceptable formats into a
@@ -9404,5 +9475,5 @@
port---Specifies the port. It can be either a string, such as
@@ -9413,5 +9484,5 @@
Finds the port number for the specified port and protocol Reads a UDP packet from a socket. If no packets are
@@ -9487,5 +9558,5 @@
Send a UDP packet over a socket. socket---The socket to shut down (typically a tcp-stream) Shuts down part of a bidirectional connection. This is
@@ -9550,10 +9621,10 @@
Returns the native OS's representation of the socket, or
@@ -9580,10 +9651,10 @@
Returns the 32-bit unsigned IP address of the remote host,
@@ -9605,10 +9676,10 @@
Returns the remote port number, or NIL if the socket is not
@@ -9630,10 +9701,10 @@
Returns 32-bit unsigned IP address of the local host. Returns the local port number Returns :internet or :file, as appropriate. Returns :active for tcp-stream, :passive for
@@ -9727,10 +9798,10 @@
Returns the socket format as specified by the :format
@@ -9752,10 +9823,10 @@
returns :stream for tcp-stream and listener-socket, and
@@ -9776,10 +9847,10 @@
simple-error The OS error code of the error A symbol representing the error code in a more
@@ -9853,10 +9924,10 @@
A string describing the context where the error happened. On
@@ -9879,5 +9950,5 @@
The close generic function can be applied to sockets. It
@@ -9911,5 +9982,5 @@
executes body with var bound to the result of applying
@@ -10050,5 +10121,5 @@
program---A string or pathname which denotes an executable file.
@@ -10101,5 +10172,5 @@
Runs the specified program in an external (Unix) process,
@@ -10121,5 +10192,5 @@
proc---An EXTERNAL-PROCESS, as returned by RUN-PROGRAM. Sends the specified "signal" to the specified
@@ -10150,10 +10221,10 @@
Returns the process id assigned to
@@ -10177,10 +10248,10 @@
Returns the stream created when the input argument to
@@ -10203,10 +10274,10 @@
Returns the stream created when the output argument to
@@ -10230,10 +10301,10 @@
Returns the stream created when the error argument to
@@ -10257,10 +10328,10 @@
Returns, as multiple values, a keyword denoting the status
@@ -10292,5 +10363,5 @@
A stream that is associated with a file descriptor has
attributes and accessors:
@@ -10579,5 +10650,5 @@
stream---a stream, presumably a fundamental-input-stream. Should try to read up to count elements from stream into the
@@ -11130,5 +11201,5 @@
stream---a stream, presumably a fundamental-output-stream. should try to write the first count elements of list to
@@ -11161,5 +11232,5 @@
stream---a stream, presumably a fundamental-input-stream should try to read successive elements from stream into
@@ -11200,5 +11271,5 @@
stream---a stream, presumably a fundamental-output-stream should try to write successive elements of vector to stream,
@@ -11238,5 +11309,5 @@
Returns the file descriptor associated with
@@ -11279,5 +11350,5 @@
stream---An input stream. The method defined on
@@ -11311,5 +11382,5 @@
Writes max-octets octets to stream from ivector, starting at
@@ -11317,5 +11388,5 @@
-
+
CHUD:*SHARK-CONFIG-FILE* [Variable]
-
+
CHUD:METER form &key (reset nil) (debug-output nil) [Macro]
Reads a symbol from the current input stream, with *PACKAGE*
@@ -15683,5 +15754,5 @@
In In In In If completely is T, sets the
@@ -15957,5 +16028,5 @@
Proclaims name
@@ -16010,5 +16081,5 @@
If name is non-NIL, defines name to be an alias for the
@@ -16052,5 +16123,5 @@
If there is already an EXTERNAL-ENTRY-POINT for
@@ -16093,5 +16164,5 @@
Calls the foreign function at the address obtained by
@@ -16133,5 +16204,5 @@
Calls the foreign function at address entrypoint passing the
@@ -16170,5 +16241,5 @@
Calls the foreign function at address entrypoint passing the
@@ -16208,10 +16279,10 @@
Tries to resolve the address of the foreign symbol
@@ -16236,10 +16307,10 @@
Tries to resolve the address of the foreign symbol name. If
@@ -16263,5 +16334,5 @@
In
@@ -16351,5 +16422,5 @@
name "MyApplication")
@@ -6615,5 +6686,5 @@
CCL 1.2 and later, the #& reader macro can be used to
@@ -15742,5 +15813,5 @@
CCL 0.14.2 and later, the #? reader macro can be used
@@ -15789,5 +15860,5 @@
CCL 1.2 and later, the #/ reader macro can be used to
@@ -15892,5 +15963,5 @@
CCL 1.2 and later, the #> reader macro reads
@@ -15921,5 +15992,5 @@
CCL 1.2 and later, the CCL:FREE
@@ -16301,5 +16372,5 @@